- The polisher battle
- g100 loudness
- G-100 Power Requirements
- Pad Advise for PC
- 7006 pad Mushrooming
- G100 vs G100A
- What combination?
- Benefits of PC?
- DA Polisher Product questions.
- G100 on the way
- Velcro from pad fell off
- Motor burnout for G100A?
- What's the difference?
- Removing Sand Marks
- polish or not?
- Amount of pressure
- Backing plate w/ g100?
- Newbie buying a PC!!! Please help
- Actual weight of G100????
- The Definition of Slow Arm Movement using the DA/PC
- Softbuff Buffing Pads
- Having Various Pads
- New to the G-100
- Pad Choice - Deep Crystal (Step 2) vs. Showcar Glaze #7
- Looking for a used G-100.
- 6.5 or 8 inch?
- Need some hand-holding.
- G100A or Equivalent and Accessories Needed
- Scratch removal with PC?
- X or 0 Pattern
- DA + Pure Polish
- DA Pad Prep before use
- snappy clean ?
- G100A vs PC 7336
- Pads & Products
- Hey Mike
- take off #80
- MPPC by Cyclo!
- Spot Buffs Kit - WARNING!!!
- Get to order DA!!! What else do I need?
- Neglected & Damaged Vehicles
- How long to buff?
- One last question
- What else do I need with the Buffer?
- 7006 pad on a DAP
- DA Buffer Not Cutting Enough?
- Struggling with the DA
- Kinda confused on what to do after taking wax off with bonnet.
- need help, using DA on mom's new crossfire
- Gonna try out my new DA in the morning
- First use of DA!!!
- #16 with 4" pads?
- Newbie with PC
- Dual Action Polisher
- #80 to #7 still not perfect
- Do I need to hit this more than once with 83?
- pc7424 via retail?
- How's this deal?
- ? on backing plate vs. velcro system
- cylco or porter cable what's the best
- #7 Show Car Glaze
- #9
- G100 polisher questions (newbie)
- First time
- G100 arrived
- Using G100 w/ Nxt (liquid) wax questions
- Warranty Question
- Use of the handle on PC?
- Set of 3 pads - WDAV99-B
- How much of the pad needs to be in contact?
- G-100(A) at 220/240 Volts?
- G100 Available to the UK?
- first try with #80
- Backing Plate Size
- First G100 effort. Good and Bad
- Oh No, Cant' get the G-100
- 4" Carpet Brushes
- G-100 Question
- what now?? is this micro marring?
- Just got my G100...
- Results from PC use on my car.
- Who uses the handle on the PC?
- Fine Cut Cleaner
- Ready to place an order...what should I buy?
- having an issue with my DA backing plate
- Question about polishing a Mini Cooper
- wanted to give a special thanks to jorge@meguiars
- help with package I have
- Rent A Dual Action Polisher
- Am i putting to much Pressure???
- Backing plate(s)
- Most aggressive product to use with the PC
- G100
- G100 on Black
- I made a clean spot...
- cleaning step with DA?
- Sonus Pads OK with Meguiars products?
- Whats Meg's recommendations for 66 with a D/A
- G- 100
- How much wax/polish do I apply to the pad?
- Still struggling...
- Problems with #80
- PC or Rotary
- New motorcycle paint...
- What split this pad??
- Whats the W-7006 pad for?
- City tools orbital buffer
- first time using g-100
- Just got my g100 in mail...uhhhh
- The G-100 and a 2005 Mustang GT
- PC/G100 possible damage
- Marine Use
- LA & Las Vegas?
- Pc7424
- First time G100 results
- Backing plate Failure?
- Woo-Hoo !!!! Look what came in the mail!!!
- Product Pad And Speed Etc..
- First use of G100
- Buffing near and around high points
- Portable G-100
- Fist Time Using PC7424
- First time using the G100. Take a look!
- Just Bought a PC7424
- Pressure
- SOFTBUFF™ Cutting Pad
- backing plate question
- how much does the G-100 cost?
- Need a backing plate for my Makita BO 6040
- DVD - How to use the PC for showcar results...
- Orbital Buffer with Pin Striped Car
- using deep srystal polish with g100
- Hey Mike P..A ???? about the g100
- Pad Question
- How to apply 80/83/21 in hard to reach areas
- No results....
- Quick G100 question.
- Porter-Cable 7424 or G-100A?
- polisher ??????
- which machine
- Question about diminishing abrasives...
- W8006 and M83 just not "cutting" it
- G-100 is here!
- Porter cable 7424 VS Meguiars g-100
- W8006 and Removing Wax.
- upcoming Audi detail
- Just Recieved G100-Ready to Rumble!!
- I need a fresh set of eyes on this please.
- newbie - paste wax question
- The 3-5-5 "Rule of Thumb"
- Took the PC plunge...NEWBIE
- Wax and pad for furniture
- Removing Paint
- Guidance and suggestions
- Broke the ice and a few questions
- Qusestion on Technique
- G100 back plate ?
- MF Bonnet for removal of products
- I had an epiphany! DACP thread
- What am I doing wrong? (PIC)
- Removing #16 with the G100
- cutting out, no power
- NXT Tech Wax with W8006?
- megs cleaner wax with g100?
- First use with PC
- Where to purchase the G100
- help with dacp
- How many pads to clean and use
- Did I buy the right products?
- Pneumatic vs Electric DA
- G100a warranty transferable?
- How to detail a new vehicle with the G-100?
- some G100 advice needed, please help
- G100 kits from ADS
- Porter Cable 7336sp
- Need help - what products to buy & seeking tips for a PT Cruiser's soft paint?
- Which speedsetting is which speed?
- 4" pads
- Using the PC for show car results DVD
- Mini Cooper Stripes & g100
- Time Needed To Do A Proper Job w/G100
- Buffer Broke
- DA speeds
- Just making sure.
- Shocked.
- I thought I had it right
- Am I doing something wrong?
- Strange Problem
- #81 difficult to remove?
- How to get out all of the spiderwebs??
- Few questions...
- Removing Scratches - advice on technique needed!~
- question about PC and Rotary
- Showcar results with PC DVD
- g100 accesories
- 1999 Honda CRV and my new G100
- Using the 7006 pad on paint.
- M1708 and M 1008
- Working time with #83 and 8006 (by G-100)
- Applying NXT wax w/G100 more effective than by hand?
- Pad problems...
- 2001 ZO6 Detail...(56k take a nap)
- Time In Each 2x2 Square
- Very Impressed
- Red 7 after DA workout
- g-100 vs porter cable vs griot
- Pads
- Very new car and G100, what products?
- G100 for Australia
- i ilke this one , (Cordless) Meguiar's G100 Dual Action Polisher
- G100 vs orbital + foam pad
- Reusing Applicator Pads
- can i use meguiars pads with Makita BO5021 ?
- First Time With the PC
- M85/m21
- Finally made the purchase!!!
- Is this a good setup plus some
- G100 and Backing Plate Threads
- Does this Porter Cable 93766 kit make more sense than the 7424?
- G-100 and Technique
- G100 European version
- Cookie-cutter effect on W8006 pad
- Question about different PC's
- Possible alternative to the G100?
- Wax, Glue-like on the surface, very difficult to remove
- Motorhome revisited......
- Product Abrasivness scale and G-100
- Help with G100
- Anyone use the pc backing plate
- Taped off areas - post steps
- Would a PC be good for a newbie like me?
- told by a detailer to us an OB for waxing not a PC
- Pad for Porter Cable DA Polisher
- A few questions...
- Jeep Wrangler Problems
- When in doubt...MASK it!
- Is my PC broken?
- Bonnet Question
- How to fix Hazing/swirls
- G100 vs G100a
- Next best thing? Help
- pc and clear flaking off
- Can Meguairs in US ship the G-100 to Asia ?
- PC and Meguiars G100A
- HOW TO: Spindle/Bearing Assy Repair
- Short path to getting started?
- Bosch GEX 270AE random orbit buffer
- How to use the pc?
- What cleaner/polish/wax arsenal should I get to go with my DAP?
- tempted to buy G-100a