- Newbie help please - Orbital Polisher Questions?
- Got my G-100 DA!!!
- PC and polish/wax questions
- Help for PC newbie
- Product, Pad and Speed settings for the Porter Cable Dual Action Polisher
- What else to get along with the G-100?
- G100/PC - back-and-forth or orbital?
- Just received my PC polisher
- Hey there bought a PC now need the products and a Power Converter
- Ready to buy a PC and need some advice on accessories
- Just got my G-100 in!!!!!! But I have a question for Mike
- New dedicated forum just for questions about the G-100 dual action polisher
- pad cleaning
- Hypothetically Speaking
- G-100a
- How to tell if the pressure applied is correct using the G-100?
- 7006 Pad
- G-100
- G-100 Can't burn the paint?!?!
- More G-100 questions
- PC NXT Ult Bonnet
- Beginner's PC Pads
- Sonus pads and swirl removal
- wool bonnets???
- G-100A just ordered, have a question...
- Something i didn`t count on...
- G-100 in Australia
- Is this a common Pad Problem?
- Meguiar's Online Member Rules - Please Read...
- Help a Newb get started from SCRATCH
- Pads that come with PC7336-How are they
- Help! Safe Swirl removal with rotary D-A
- Meg's 7006 pad and the G-100
- Cleaning the Pads
- Detailing questions, PC 7424
- Mike, have you ever used the G-104 cordless orbital?
- G-100 Holiday Offer Extended Until Dec. 7th!
- need help making a $50 order
- How long should a buffing pad last?
- Pad cleaning
- Is the G-100 the same as PC7424?
- Called to order but they're closed?
- Coleman 6" Orbital polisher
- How to use PC where metal rolls and cups
- DA Polisher helpful tips or tricks
- Does the hook and loop of the backing plate wear out ?
- What thing's to use with the PC
- Aluminum Tool Box clean-up
- Pc Power Inverter?
- Cleaning Ultimate Bonnets
- how long would i work a 2x2 area with nxt wax
- Always properly secure your tools.
- PC in Awkward Places
- well
- PC used for removal of product
- is it ok to use scratchx with the g100
- can someone give a quick lesson using #7 with the G100a
- help
- Something not quite right here
- what do i???
- Is there a difference in the PC 7424 and the PC 7336?
- G100 to australia?
- Just bought a PC 7336 - Need help!
- 7336 backing plate
- Just got my PC, Need some tips!
- Backing plate Q
- Porter-Cable 7424
- Canadian Purchase
- New Meguiars cordless orbital buffer comparible to G-100?
- Life Expectancy of the PC
- Ordered my G-100 today!
- When To Use Foam Cutting Pad
- G-100 and pads
- Is Speed Glaze indicated for this truck detail?
- Bought the PC 7336; have some questions!
- Pc 7424
- Life Span of backing plate
- Applying polishes with G-100
- Speed
- Hi
- Speed Dial on G-100 question
- Can PC cause Holograms?!
- Real quick question; backing plate
- Used G-100 for the first time today
- PC with spray wax
- pads and backing plates
- New PC owner! Here's my plan.....
- More agressive product or more agressive pad? Need some answers please!
- Absorbtion of Pads
- 80 doing more than 83?
- Before my 1st use of the PC...
- Lifetime Warranty applicable to the UK?
- backing plate and pad question
- Brand new pad
- Stupid Question...
- PC 7424 Polishing pad
- G100A-All you need???
- Is it a G-100 or G-100A
- G100 Advice
- Too much trial and error!
- Excessive Dusting, Why?
- Got my PC now what.
- Another new guy
- DA polisher & #6
- cleaning your pads when using PC
- Not getting good results with #80 & #83
- Stubborn Swirls on New Black Car!
- PC 7424 + Sonus Pad Kit
- How much is too much??
- pads keep coming off backing plate
- Light scratches on black 05 GT
- layering #83, #7, #21, #26
- Black Benz
- question about cleaning pads
- (Uncomplete?) G-100 package contents
- Tuneup?
- Using PC on Marble?!?
- So CAl members
- Water Spots Appear :(
- 7424 same as G-100?
- Using G-100 To apply DC #2
- DA claying pad & Quick Change Pads
- How long does it normally take to polish a car with a G-100
- G-100A Info please
- 7336 and 7424 questions
- Best way to get #16 onto a PC Pad ?
- Buffer/Polisher Help
- mine only spins right... i think
- dewalt orbit sander/polisher
- Question about the G100 warranty
- What to use on this paint?
- PC pad storage
- Question about diminishing abrasives
- Bonnets For G-100
- What am I doing wrong!?
- Proper pad use for G-100
- Micro marring on black paint. Please help.
- granules in polishing pad
- da w/ dc1,2,3
- Compound for fresh paint?
- new g100
- G-100 Packages no more?
- Waxing W/ the G100
- Size and Weight of G100
- Using the G-100 to remove swirls, scratches and etchings...
- Applied NO.80 Speed Glaze N product won't come off
- Removing Oxidation using PC and ???
- D.A. on a stick!
- clear plastic polishing??
- So confused
- What kind of sponge pads can I use?
- Removing #80
- do i need power converter for my Dual action polisher?
- PC 7336sp?
- Any promotions for the G-100 coming soon?
- Need some pads now! (Mike Phillips)
- Something broke in my PC
- Speed glaze, removed swirls, but now tiny spots?
- What to use after #80 for a better finish
- Confused about all the different products
- Dual Action Polisher Safety
- Need Opinions on Garage Lighting for Polishing
- Polisher not removing all polish?
- Which Type of Pads?
- Are the Ultimate Bonnets and the GC MF Bonnets the same product?
- Polisher Vibrations
- Time to get busy, I got the G-100, plus.....
- Purchasing Pads for DA
- G-100 Specs
- Slow Down to speed up
- Removing Product w/G100??
- G100 Newbie Here
- HELP - NYC area - Need G100 A.S.A.P
- Round 1 ....83 vs me
- micro-marring? please help
- Can you Clean/Polish too Many Times a Year?
- Done right the first time...
- Ordering a G-100, but need some tips
- Just got mine today
- Alternative to the G-100
- Pure Waxes vs. Polish/Wax
- Initial Order
- G-100 on it's way!
- #9 Swirl Remover 2.0
- Wow, Guess I am out of the loop!
- Is it supposed to spin?
- First attempt with the G-100
- recurring oxidation
- What's the dif?
- Masking Q?
- Pads for the G100
- Pad maintenance for the G-100
- Megs 83 vs Me Round 2
- It's arrived!
- How can I get rid of these......
- Finally ordered the G100...now the fun part...
- Thanks and a question
- G-100 & Cordless Pads.
- When to reach for a stronger product or pad or speed?
- DA on curved surfaces
- what pad and speed to use with rubbing compound?
- g100a Polisher
- Me vs megs 83 round 3 kinda weird
- Used my new G100 and the backing plate fell apart
- PC and me
- ? on #16.
- How thin is too thin??
- corvette fiberglass...
- What the difference between these??
- PC and harder clear coats
- G-100 & NXT GEN paste wax
- quick question about the pc 7424
- Pads Q
- Speeds for certain tasks on G100
- DA question
- Removing Scratches By Hand
- DA Velcro buffing system
- Porter Cable Noobie....
- finally purchased the porter cable 7424
- #80 Speed Glaze
- G100 warranty
- Meg Pad Cleaning
- model # for the DA
- Speed Glaze #80 and Sonus SFX-2
- Finally tried my G-100
- need help picking buffer
- Videos on How-To-Use Dual Action Polisher?
- Using G100A as a sander
- W-7006 pad with a bonnet?
- First post
- Using a PC On Glass?
- Finishing Pad
- PC/G100 First attempt
- question about pc and m21
- First use of PC-WOW!!!!
- 1st time!
- Switching Product
- Polishing pad
- Storage
- DA - local purchase?
- New PC 7336 - Strange Rattling Noise
- PC 7335 Questions
- Bonnet?
- G100 for Paint Prep
- Where to purchse in Canada?
- Tried #80 & #83, Didnt work...
- Pad cleaning
- Best Price on G100??
- How long?
- How many foam pads do I need??