- Product, Pad and Speed settings for the Rotary Buffer
- Which Rotary to Buy?
- How long does it take you just to polish?
- questions about OLD rotary buffer
- DACP With the rotary
- Question about old school rotary
- Meguiar's Online Member Rules - Please Read...
- Calling 2hotford
- How to use the rotary on side panels?
- Applying product with a foam applicator
- Need help over the rotary decision
- Need opinions on a rotary
- Makita 9227c WOW GREAT PRICE
- What causes the buffer to hop?
- Rotary Power-on Power-off
- Compressed Air Rotary Buffer
- Pad cleaning with spur only?
- Need suggestions on Makita BO6040
- swirl remover question and rotary polisher
- NOOB needs help
- I made the jump
- Porter Cable 7428
- Scrap panel not an option
- It's here
- Centering Megs Pads
- cookie cutter practice sheets
- High Speed Buffing
- Got to play w/rotary
- Need buffing help - new paint
- Got my 1st Rotary in action!
- Rotary update..SHOCKING
- Upgrading to Rotary Buffer
- Where I can find Makita 9227 , 240V??
- How much product is left on paint after polishing?
- 1st time rotary questions?
- Choosing between #84 and #85: what are the differences?
- 8" pad vs. 6.5" pad
- Can I prime pad w/h20?
- The Cav's shaping up
- Producing a Swirl Free Finish - A few good threads to read first...
- LC 6.5" on my rotary
- Time with DACP
- Help selecting car panel to practice rotary?
- New Rotary Buffer
- Anyone use an IR Thermometer when they buff?
- special handle for rotary
- makita BO6040
- My V240 Makita 9227C has just arrived
- How do you buff these areas???
- Rotary speed
- Playing with the idea of getting a rotary
- Changing Speed.
- help on buffing
- Meguiar's W-4000 Cut 'N Shine® Wool Pad
- advice on rotary purchase
- Rotarty Making swirl marks...
- Fresh PPG paint work
- rotary and orbital question
- rotary maintenance
- Difference in Makita polishers?
- Wool pad.
- Speed dial on Chicago Electric rotary(1000-3000 rpm)
- Why do we need HEAT!!
- Thanks Joe (Superior Shine)
- Rotary Practice
- 1000 RPM & Under and proper movement = Safe?
- Rotary whooped me!...
- Buffing question ?
- Can a badly centered pad cause holograms?
- How hot should the paint be immediately after buffing?
- Backingplates for European buffer
- Polishing Machine Products Help
- Pre-Rotary prep
- help on rotary
- Makta 9227C Question
- rotary polishers; choice of four
- Rotary buffer vs Right angle drill
- WOOHOO! Just won a NEW Makita 9227C on ebay for...
- purchasing rotary tips advice
- Anyone In Long Island
- Pad flat to the paint, or angled 15*?
- Replace Cord
- holograms with Optimum NOT w/ DACP
- DACP #83 & Rotary = BIG problems
- PC versus Rotary RPM's
- Applying sealants with rotary
- Did I make a mistake with ScratchX?
- I just got my Makita...
- what speed for #83 dACp do u use ?
- where to purchase makita 9227c?
- Did I quit to soon....
- Jeff Smith used a rotary for the first time.
- hand position really makes a difference
- Advice on buying rotary please. ..
- What should I expect the finish to be like after #84/W7006?
- Rotary buffer hopping
- rotary buffing school of hard knocks
- Rotary Buffer on Plastic Composite Fenders?
- makita b06040
- Starting out.
- Your short list of rotary polishes?
- Tried the rotary out today, a few q's
- This is tough, I really need help...
- Desperate-need Help!!!
- Can DA Pneumatic tools get rid of Holograms??
- Makita 9227c
- Second try with my new Makita
- Learned a few lessons
- Anybody use a Chicago brand rotary
- passes
- Rotary polishing on Carbor Fiber?
- Meguiar's rotary backing plate
- Water spots 1: Rotary 0
- 6.5" pads.
- Hitachi SP18VAH vs. Makita 9227CX3
- Dynabrade rotary buffer with a dual-action polisher attachment
- Rotary Buffer with NXT Tech Wax?
- Rotary on side panels
- Really tight spaces with a rotary buffer
- makin the jump
- clear plastic curtains
- Rotary Buffers
- Dynabrade head kit- turn your rotary into orbital
- Makita polisher repairs
- Buffer Package
- Starting the Rotary Journey.
- When the DA doesn't ....
- 9 sec Camero Before & After
- My first rotary buff
- what does burned clear coat look like?
- Never seen this tool before.
- I did it...
- what rotary?
- #85 with Wool pad vs burgundy pad
- Easily gets holograms on vertical panels
- Porter Cable 7336SP
- picked up a rotary buffer this weekend, have a few questions
- Passes on Average?
- quick question on makita rotary
- anyone use #83 w/ Sonus Black Polishing pad ?
- Rotary to orbital kit?
- can the Deep Crystal 3-step be applied w/rotary??
- newbie questions on products to buy
- milwaukee
- my 6" flex backing plate should fit ?
- Ahh.....rotary help....I dont know whats wrong...
- Rotary newbie...polish flying everywhere
- what the gray noe on the G100A?
- Does PC7248 have electronic speed control?
- Newb trying to use a rotary...stupid questions inside this post
- wool pads for cutting
- Cutting Paint
- Meguair's Educational Video
- Is a Chicago brand Rotary Polisher a good brand
- Anybody recommend a Hitachi SP18VA
- backing plate question
- Rotary Lessons ?
- Is this as good as I'll be able to get?
- 6.5" VS *" Pads
- please tell me what i need!!!!!!!!!!
- My First Test Panel for my new Makita
- Im confused with product/pad selection
- B&d Kp600
- My Quest for the Perfect Shine
- Dewalt
- Rotary: My First Practice!
- questionf for superior shine
- First time you buffed a car
- Very HARD water stains
- Purchasing a Hitachi SP18VA ..
- Is this Orbital buffer OK?
- How touse the Rotary ?DVD's?
- Compounding
- Help! Buffing out water stains?
- Anybody here have some pics of their rotary work with 80/83
- More Rotary Shananigans!
- Tell my your experience with lighter polishes; #82, #80, #9 etc
- Perfect Finish
- My first real experience with the Rotary
- Proper Pad Cleaning
- Planning on getting a rotary - need help
- deep gloss & swirl free after wet sanding without residue remaining
- Contoured Panels?
- Rotary and Pressure
- Polish Breaking Down to fast?
- Rotary for a Newbie? Maybe?
- surface apearance after #84?
- Diminishing abrasives and edges
- Lost spindel wrench
- Metabo PE12-175
- Rotary: what kind of grip do you prefer?
- Strike Through Demonstration
- Rotary Finishing vs. PC Finishing
- Coleman Rotary?
- bought a rotary,need help or a teacher
- Getting trails / holograms
- Matika 9227CX3
- Centering meg pads
- Need A Rotary Buffer Video/Teacher.
- Angle of Attack
- Meguiar's Rotary Backing Plate W64
- dewalt or makita
- Products for Learning
- ei mike! :D
- Metabo PE 12-175 thread adapter
- Water Stain on Clear Coat where I had Car Bra
- Wax buffing with Makita???
- machine glaze #3
- Meguiar's Pads
- Metabo PE12-175 best price?
- Ok, I am convinced that I need a rotary now!
- I just joined the rotary club!
- Speed question....G100 vs rotary....
- Meguairs Backing plate problem
- Porter-Cable 7428 speed
- solo
- Zenith Point Rotary Polishing technique
- W65A backing plate, Is it available for sale?
- When enough is enough
- Porter cable rotary and edge pad system
- Chicago Electric 6" waxer/polisher
- Thanks to all who contribute!
- what do i need ?
- Please tell me if these PC polishers are what I need
- Just purchased Metabo PE12-175
- Polished car & Dust & Washing!
- Would either of these do the trick in a budget?
- First timer needs options
- W-5500 Pads
- Confused!
- Machine getting away from me ?!!!!!
- Material application advice for a roto newbie
- Porter Cable 7424..?
- which products to use
- What's the difference..!
- what would happen
- Can Rotary remove down to primer scratches?
- PC 7336 question
- I want to learn how to use a rotary, and get no swirls....
- which one?
- first time
- old sears polisher...
- Any "How-to`s" on mastering rotary??
- W66 So1o Backing Plate Question
- First try with the rotary (few pics)
- Pc 7428
- Rotary backing plate to fit 6.5" pads ??????
- air polisher
- Rotary Buffing Write-Up (Lots of pictures)
- Black and Decker Polisher