Full Detail with Meguiar's Line up

[spriro]

Here is what I did:
Wash
DACP (yellow pad on 6)
#9 (White pad on 5)
#7 (White pad on 3)
#26 (Black pad on 3)

All works done with PC using LC pad

I noticed # 26 gave a darker look than NXT.
Although NXT gives more pop to the metalic flakes, I like the darker look of #26.

Good thing I took a picture yesterday. A heavy storm was in our area list night. Now my car is dirty again. :mad:

http://img35.photobucket.com/albums/v107/spriro/IMG_1401.jpg

http://img35.photobucket.com/albums/v107/spriro/IMG_1403.jpg

http://img35.photobucket.com/albums/v107/spriro/IMG_1402.jpg

http://img35.photobucket.com/albums/v107/spriro/IMG_1404.jpg

http://img35.photobucket.com/albums/v107/spriro/IMG_1405.jpg

http://img35.photobucket.com/albums/v107/spriro/IMG_1406.jpg

[JaguarXJ6]

Now thats well maintained :) Looks good and I love the color.

Sunny

[DETLMAN]

Excellent, I have always liked that color. The reflection off the roof is killer !

[denetc]

stunning job! I bet you stop traffic!
:cool:

[M5police]

Nice shine.......did you ever wax those aluminum rims with NXT? The shine is blinding on my stock alloy rims.

[jcma81]

Great job. I have a similar color and still debating using #26 or NXT as the topper. Can't seem to get away from #26 though

[6318]

I'd hate to mess up a good thing, but you might try the DACP on #5...I think I've read somewhere that Meguiars doesn't recommend using it above that speed...

[gb387]

Looks great! Nice looking red, you don't seem to see many red Mercedes around!

[Mustangl3]

I just ordered a PC and have been trying to figure out what pad and cleaner and polish combination i should use. I the yellow pad used with the DACP considered a cutting pad?

[spriro]

Yes the yellow pad that I used on this detail is the cutting pad from Lake Country.
The meguiar's cutting pad is Maroon(W-7006) if I wasn't mistaken.

[Rockpick]

Looks GrEaT! The first word that popped into my mind when I was viewing your pictures was 'sleek'. In my opinion, the depth and reflection are TOP NOTCH! Great job!

RP :D

[Chris Nemlich]

Looks very nice! That color has a very nice, almost sophisticated look to it, I love it!

Great work!

:xyxthumbs

Chris

[Mike Phillips]

Originally posted by Mustangl3
I just ordered a PC and have been trying to figure out what pad and cleaner and polish combination i should use. I the yellow pad used with the DACP considered a cutting pad?


W-7006 foam cutting pad (http://www.meguiars.com/store_meguiars/product_detail.cfm?sku=W-70)

W-8006 foam polishing pad (http://www.meguiars.com/store_meguiars/product_detail.cfm?sku=W-80)

W-9006 foam finishing pad (http://www.meguiars.com/store_meguiars/product_detail.cfm?sku=W-90)


Meguiar's doesn't recommend using the W-7006 foam cutting pad on the G-100 dual action polisher, (PC), or going polishing on the 6.0 setting.

Mike

p.s.

Looks deep, reflective and wet! :xyxthumbs

Mike

[Chris Nemlich]

Mike,

Kind of off-topic but, why doesn't Meguiar's reccommend the use of the cutting pad of the PC? I was thinking of purchasing one of these to use with 83 to remove tougher swirls and scratches.

Thanks

Chris