Antonio Wright
Jun 9th, 2004, 06:23 PM
Well I consider myself a pretty good detailer. I have done a few cars in the past but my self doubt held me back to really pursue this craft. That is the main reason I NEVER detailed a black car. Well after doing tons of research and building up enough courage I finally detailed my brothers BLACK Jetta. Needless to say the results were amazing.
http://img.villagephotos.com/p/2002-2/12962/Picture365.jpg
I did take some before shots but they came out to be to low of quality to post. I should have looked at the settings on the camera before but I did not and I am sorry.
http://img.villagephotos.com/p/2002-2/12962/Picture364.jpg
The products used were MPPC, DACP(#83), Swirl Free Polish(#82), and Show Car Glaze(#7). I did each panel with DACP x3 and I got out most of the swirls. The front bumpers needs to be painted badly. In the end I am still not happy with the results but I know If I had a rotary things would look alot better.
Everything was applied via PC with the correct pads.
http://img.villagephotos.com/p/2002-2/12962/Picture365.jpg
I did take some before shots but they came out to be to low of quality to post. I should have looked at the settings on the camera before but I did not and I am sorry.
http://img.villagephotos.com/p/2002-2/12962/Picture364.jpg
The products used were MPPC, DACP(#83), Swirl Free Polish(#82), and Show Car Glaze(#7). I did each panel with DACP x3 and I got out most of the swirls. The front bumpers needs to be painted badly. In the end I am still not happy with the results but I know If I had a rotary things would look alot better.
Everything was applied via PC with the correct pads.