Mless5
Mar 24th, 2007, 08:12 PM
I used PC random orbital for this detail wit Lake pads (I think). Too bad there are really deep scratches and PC won't do a thing. Interior was a mess as well as the engine.
On the engine I used Meguiar's SafeDegreaser 3:1, spray, work it in with a brush, high pressure rinse. 2 times.
Body:
1. Wash 2 times wish dish soap and high pressure.
2. Clay with Meguiar's smooth surface clay and QD.
3. Wash again.
4. Meguiar's # 83 w/orange pad spread at 3, work in at 5.
5. Meguiar's Swirl Remover 2.0 w/white pad spread at 3, work in at 6.
6. Meguiar's Show car Glaze 7 rub in by hand, let it haze/dry, buff by hand.
7. Meguiar's Synthetic Sealant # 21 apply by nahd, let it haze/dry, buff by hand. 2 times.
8. Whip out a 6 pack... Wait, that doesn't belong here.
Before.
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060746.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060747.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060748.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060751.jpg
Trunk lid after claying:
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060750.jpg
#83:
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070630.jpg
After:
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070634.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070633.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070635.jpg
Cheers.
On the engine I used Meguiar's SafeDegreaser 3:1, spray, work it in with a brush, high pressure rinse. 2 times.
Body:
1. Wash 2 times wish dish soap and high pressure.
2. Clay with Meguiar's smooth surface clay and QD.
3. Wash again.
4. Meguiar's # 83 w/orange pad spread at 3, work in at 5.
5. Meguiar's Swirl Remover 2.0 w/white pad spread at 3, work in at 6.
6. Meguiar's Show car Glaze 7 rub in by hand, let it haze/dry, buff by hand.
7. Meguiar's Synthetic Sealant # 21 apply by nahd, let it haze/dry, buff by hand. 2 times.
8. Whip out a 6 pack... Wait, that doesn't belong here.
Before.
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060746.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060747.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060748.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060751.jpg
Trunk lid after claying:
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1060750.jpg
#83:
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070630.jpg
After:
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070634.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070633.jpg
http://i6.photobucket.com/albums/y219/kazakovi/e30%20parting/P1070635.jpg
Cheers.