polymer sealant

[teammgwrs]

guys,

can you help me in using this product and what benefits i can from it. Thanks.:)

[Mike Phillips]

Hi teammgwrs

#20 is a Polymer Sealant with a light amount of chemical cleaners. It is intended for use on finishes in good to excellent condition. If you are applying to a neglected finish, you should use a paint cleaner like Medallion Premium Paint Cleaner, Deep Crystal Step One Paint Cleaner, or Meguiar's Clear Coat Body Scrub, or ScratchX first.

Work in thoroughly, allow to dry for 10-15 minutes, and then remove with either a clean, soft 100% cotton terry cloth towel, or microfiber polishing cloth.

#20 isa awesome product, lasts a long time and delivers a slick, high shine surface. Most people like how easy it wipes off.

Check out the results Superior Shine achieved with #20 on this thread,

http://www.meguiarsonline.com/forums/showthread.php?s=&threadid=253

Mike

[mike_c70]

NOOB question but is this the same as a wax like NXT? Would I use it after a coat of wax or before?

[teammgwrs]

mike,

thanks for your reply....just want to ask can i just remove the polymer sealant with a buffing machine with W-8000 Polishing Pad?

[Mike Phillips]

Originally posted by mike_c70
NOOB question but is this the same as a wax like NXT? Would I use it after a coat of wax or before?

#20 Polymer Sealant is a paint protectant, it is a type of wax. After you clean and polish your car's finish, you would apply a paint protectant. Waxes are paint protectants,#20 Polymer Sealant is a type of wax.

If you have a new car, or paint that is in good to excellent condtion, then after washing your car, you could apply #20 Polymer Sealant.

To your question, "Would I use it after a coat of wax or before?"

The answer is neither. #20 is the coat of wax.

Hope this helps...

Mike

[teammgwrs]

mike,

what pads should i use to remove the polymer sealant or I can just use the mf cloth...... how long should the polymer sealant stays on the car before i wipe it off.

thanks and more power

[Mike Phillips]

Originally posted by teammgwrs
mike,

what pads should i use to remove the polymer sealant or I can just use the mf cloth...... how long should the polymer sealant stays on the car before i wipe it off.

thanks and more power

Hi teammwrs,

To remove the #20 Polymer Sealant, use microfiber polishing cloths if you have them. #20 wipes off incredibly easy.

As far as curing/drying time goes...

10-15 minutes is standard. When I use #20 Polymer Sealant, I apply to the entire car all at once. Then, by the time I have gone all the way around the car, 10-15 minutes have passed and I can begin removing it where I started when I applied it and continue removing it following my application path.

Hope this helps...

Mike

[teammgwrs]

mike,

thanks for your help.