PDA

View Full Version : The Dual Action Polisher



Pages : 1 2 3 4 [5] 6 7 8 9

  1. Ultimate Compound or M105 and M205?
  2. Removing fine scratches on carbon fibre wing, Help!
  3. Keeping the pad spinning
  4. G-100 Questions!
  5. I'm getting ready to order a G110 (need help from Mike?)
  6. So many choices, so little time.
  7. 2.0 pad question
  8. My new Flex polisher is here, My new Flex polisher is here!
  9. Taping
  10. Is this safe to do with the G110 or no???
  11. Newbe?'s
  12. What do you guys do about the A pillar
  13. G110 pad not rotating? Too much pressure?
  14. Help with getting my first polisher
  15. What to get next...
  16. HELP! New to DA and BIG project
  17. concern for my hood and fascia
  18. G100 Service
  19. SwirlX or Swirl Remover 2.0?
  20. Issues with g110 rotation
  21. Micromarring with M205 and DA
  22. G110 Backing Plate interchangeability...
  23. Purchasing M105 and M205 (pad speed combos)
  24. damage possibilities
  25. New Guy... Use just Consumer Products?
  26. What Flex pads for different products?
  27. resizing 6 1/2" pads
  28. What pad should I use to apply #7 Show Car Glaze?
  29. Choice of DA, G110 or PC?please help~
  30. PC 7424 at Amazon
  31. The G100, Setting 6, and W7006 Pads (unusual question)
  32. New guy DA questions
  33. Critique My Technique ***Video Included***
  34. how do you manage the edges?
  35. Removing mild swirls!
  36. Flex VRG-3401 - Initial Impressions
  37. What 2.0 Pad/Consumer Product Combo?
  38. G110 New unit bad or not???
  39. Cleaning your pad on the fly
  40. G110 Help Needed on '02 Mustang GT
  41. DA + Rotary= $100,000,000
  42. Correct Pads for G110 and M105/205
  43. M105/M205 questions.
  44. What to buy?
  45. Backing plate question
  46. ColorX with a DA polisher?
  47. Found PC 7424 in dad's garage
  48. Limitations of the G110?
  49. G100,g110,g220 & pc da
  50. VAG hard paint + G220
  51. Use 8" pads W/G100?
  52. G110 on the way!
  53. otherDA's
  54. G110 Warranty?
  55. got my ADS package, what else should i get?
  56. Need help on Pads...
  57. Backing Plate
  58. My New DA G110 only works on Speed 6
  59. Pad selection??
  60. Found G220 in Italy!
  61. g110 backing plate with 2.0 pads???
  62. Bought cutting pads with DA...doh!
  63. Pad Questions
  64. Finally got the DA! UC/SwirlX/M205 Overkill?
  65. G220
  66. Pc 7424
  67. Ultimate bonnets for the SoftBuff 2.0 Pads?
  68. Where do you keep your G110/or PC?
  69. Recommendations for Starting Out on G110 Purchase
  70. 1st DA use... UC great! SwirlX & 205 not so great!
  71. dripping wet look
  72. Thinking of buying a DA...couple of ???'s
  73. spray paint overspray on scooter
  74. i have a question on what pads to use with my DA
  75. ScratchX or Deep Crystal System Paint Cleaner?
  76. Happy Dad's Day... to me and you
  77. random orbital?
  78. Need Pad Help for Father's Day
  79. Can I go right from UC with a G110 to Swissvax Cleaner Fluid/Wax?
  80. Is this a good kit to start out?
  81. Hands hurt, but not enough pressure?
  82. How well does M205 correct?
  83. Frustrated.. need help to regroup and try it next weekend
  84. New pad order need advice please
  85. G110 & 2.0 Pads?
  86. marking pads for cleaning
  87. Look at the pic and tell me which pad to use....
  88. 110 vs 100 vs 220 and PC7424 vs 7424XP
  89. Terry bonnet ok, enough?
  90. blackfire wet ice over fire shine
  91. M105 and M205 are great... is there a middle ground?
  92. PC7424/Meg's diminishing abrasive question?
  93. Few ?? before starting my detailing....
  94. what type of pad to use
  95. What pad to use?
  96. single stage paint
  97. G110 first detail
  98. Thanks ADS
  99. Used the G110 for the first time this weekend
  100. Meguiars G220 - Australia
  101. Finally getting a G110!!
  102. What after M80?
  103. G100 went missing, so now what?
  104. First go around with the DA
  105. G110 or Flex
  106. G110 Question?
  107. Which pads and products for a Honda?
  108. Backing plates and adapters...
  109. Polisher with the least vibration?
  110. Micromarring on a 2007 Corvette
  111. Old version M105 on DA
  112. Worth upgrading to 7424XP from 7424?
  113. Re-using pads
  114. Got my PCXP :)
  115. If I buy a flex....
  116. W9006 cleaning
  117. Are 2.0 pads too big to use with G100?
  118. M80 After M105?
  119. Need a very light PC polish suggestion...
  120. Ready to dive in PC7424
  121. Newbie wanting to use a RO (GMC SA515)
  122. my results after using a PC7424XP on my Honda Civic
  123. Adapter for W68DA backing plate
  124. W64DA backing plate Velcro separated
  125. PC and 105 vs 1000 grit wet sand (pic heavy)
  126. Any Advice?
  127. cutting pads
  128. G220 & Pad questions
  129. G220 G110 Difference
  130. PC use for 105 & 205 - How long to polish??
  131. What did I do wrong?
  132. New PC user..Trying to Learn
  133. Porter Cable 7424, backing plate?
  134. New Dual Action Polisher User Please Help
  135. G110 went down mid-detail
  136. Opinions on 3" DA Cutter/Buffer/Polisher?
  137. First go with the G220/110
  138. Lake Country Purple Foamed Wool Pads
  139. W67DA Backing Plate--GREAT!
  140. Pad Powder?
  141. Torn between the Flex and the 7424XP...
  142. Complete package ?
  143. Newbie
  144. PC7424 - Backing plate and pad
  145. G110 support after warranty?
  146. G110 question
  147. Pc 7336sp
  148. how to apply pure polish(m07) with DA
  149. Got my pads..but
  150. New Buffer/Polisher
  151. Micro-marring when using DA and W8006
  152. Any use for PC #54745 White Foam Pads
  153. Product, Pad and Speed settings for the G110 Dual Action Polisher - Updated!
  154. Random Orbital Diagrams
  155. Lake Country pads
  156. polishes
  157. First time using the G110
  158. 8207 and 8207B pads?
  159. How good are Buff and Shine pads?
  160. Porter Cable 7424 XP question
  161. Which DA polisher???
  162. Dual Action Polisher G110v2
  163. W7207 7" Pad shedding
  164. Should I buy a $30 Orbital Buffer from AutoZone?
  165. Thinking I want a 110, but have some ??
  166. On the brink of buying a DA...
  167. LC Flats or Hex Logic pads?
  168. LC Pads?
  169. Dewalt dual action buffer?
  170. finishing pad question
  171. If i get the NEW DA from meguiars?
  172. My friend wants a Griot's 6" DA...need input
  173. Is the Dual-Action Polisher Safe?
  174. Quick Review from SEMA: Meguiar's G100 V2
  175. which pads? im new!!!
  176. Question! Advice! Help....?
  177. Newbie DA Q's + Mirror Glaze V Consumer Meguiar's
  178. Suggestions on pad choices, please
  179. Planning on Getting the New Dual Action Polisher
  180. G110 V2 - Lets ROCK AND ROLL BABY!
  181. pad selection driving me crazy!!!
  182. Removing Wax with a DA... Not so good
  183. getting started --- please help on products to buy
  184. Got my 220 today and tried it out!
  185. G110 smells
  186. owner's manual ?
  187. Porter Cable 7424XP counterweight
  188. soft buff 2.0 Question
  189. Just a Quick Comparision between the G110V2 and PCXP
  190. Working area of 6.5" pad?
  191. got a PC7424-What else?
  192. yet another pad question.
  193. Still waiting for my g110 (almost 2mo's)
  194. Why not speed 6 ?
  195. Problems with G110
  196. New DA Polisher
  197. Meguiars pad sizes?
  198. Help with this polisher
  199. Just got my v2!!!
  200. G110v2 Extension cord size and gauge....
  201. Getting a new PC 7424 XP Dual Action Polisher
  202. Light Haze appear after using 105
  203. Got my new G110 V2 today...First time DA owner.
  204. Vibration - What is the best way to help with the vibration ?
  205. Question about G110v2
  206. Is the Dynabrade attachment and Flex pretty much the same thing?
  207. What's the difference between these backing plates?
  208. Best Bang-for-Buck DA Polisher?
  209. G220 and my upcoming detail!
  210. Re: Some conversation between Kevin Brown and Barry Theal
  211. Should I buy G110 or another brand!!!! Pros and Cons
  212. Look what was waiting for me at home!
  213. Advanced Tool Design Model ATD-10511 Polisher?
  214. I tested out my new 110v2 today!
  215. G220 - Newbie's question!
  216. G220 & Edge2000 Pad
  217. Pad Question for PC XP
  218. G220 v2
  219. G110 V2 problems
  220. Asking other brand DA compared to GA220
  221. New to a DA, what pads to buy?
  222. What is the difference between pads?
  223. Help - First time DA user and may have, um, issues
  224. What Pads/Products to use? DA 7424
  225. quick question
  226. M07
  227. OK to apply ColorX with the G110?
  228. G110v2 & 105,205
  229. Cutting Pad with DA Polisher?
  230. Meguiar's Polisher.
  231. Bosch 3725?
  232. New to Buffer/Polisher World
  233. Trouble on Lexus paint correction
  234. 3" backing plate
  235. Pad question
  236. What got all over my pad?
  237. So you say a "thin" coat of wax is best huh?
  238. Handle Off G110v2??
  239. Any Chicago area G110 owners?
  240. Meguiar's **NEW** G110 V2 Dual Action Polisher Review!!!
  241. Using the DA on non-flat surfaces
  242. Safe to use for anyone?
  243. Pads for G100?
  244. Just Ordered a G110V2 today
  245. G110V2 on grooves.... HELP!
  246. G110V2 warranty
  247. G110V2 vs Porter Cable
  248. G110V2 pad question
  249. Will the product I already own be usefull with a 7424 DA?
  250. Water/ moisture in M66?