PDA

View Full Version : The Dual Action Polisher



Pages : 1 2 3 4 5 6 7 8 [9]

  1. My first time
  2. Backing Plate/Pads suggestions for the MT300?
  3. When to switch DA pads
  4. G110v2 replacement pads?
  5. Rupes 15 or MT300?
  6. Wetsanding with the MT300
  7. First Time Using MT300
  8. Pad & Product suggestion for older Meguiar's DA Polisher (Porter Cable 7335)
  9. MT320 Dual Action Polisher Rattling Noise?
  10. MT300, which pad will work best for swirls on dealer installed swirls :( Foam or MF
  11. MT320 the pad using
  12. Current replacement PN for W-8006 Pad?
  13. Using a 6" Backing Plate on Rupes LHR15 II
  14. Weird Modeled Spot from using a DA Polisher w/ 105
  15. DA Power System - Torque settings for Cordless Drill
  16. Which pads?
  17. DFC, DFP and DFF open or closed cell?
  18. D300, what to use after instead of finishing wax
  19. DA Polisher on hard to get to areas
  20. MT300 power cord issue + out of warranty
  21. Meguiars vs. Lake Country Pads
  22. Old School Equipment. Is it still valid?
  23. TorqX DA Polisher
  24. Thoughts about the MT300
  25. Seeking some advice on polishing
  26. How many polishers do you need?
  27. Confused over backer plate and pad choice
  28. G110v2 backer plate and pads: Conflicting advice