PDA

View Full Version : impressed with 105 on headlights



dc2_
Mar 3rd, 2011, 12:39 PM
so this was my first time ever using 105
i been using UC for headlights but i thought id try 105
i had to wetsand 1000grit sideways then 2000grit up n down
plus 105 using the griots DA with the s3bp backingplate on a 4inch yellow pad.

speed 5, cleared up everything real nice...especially the left headlight!it was really bad to start

finished off with 205 then sealed it with m26(all i had with me) thats fine thou right?

as u can see i had to the hood popped to get the top edge but i find it hard to get the side n bottom edges...i tried by hand but no luck...what do u recommend?

sorry i didnt get a pic of before i started sanding i guess i was too excited lol but trust me they were bad

http://i930.photobucket.com/albums/ad143/dc2_integra00/Photo-03701.jpg
http://i930.photobucket.com/albums/ad143/dc2_integra00/Photo-03711.jpg
http://i930.photobucket.com/albums/ad143/dc2_integra00/Photo-03721.jpg

CWilliams4296
Mar 3rd, 2011, 12:50 PM
Good job on the headlights!

imacarnut
Mar 3rd, 2011, 06:06 PM
Nice job :xyxthumbs

Diesel_Man
Mar 3rd, 2011, 06:10 PM
looks great; for the bottom you could probably try to pop out the light to get at it better with the DA