PDA

View Full Version : Cloudiness after PlastX



LeMarque
Aug 7th, 2011, 07:42 PM
My wife's XC90 headlights were really really bad. The UV coating was as bad as it gets.

I started wet sanding with 400 grit, then 600 - 1000 - 2000 and finished with 3000.

I then used Megs UC on a foam pad attached to a 3/8 drill. (My G110V2 hasn't arrived yet). The results with UC was fantastic! The plastic sparkled.

But after I applied PastX it seems to have actually dulled the plastic. I haven't applied a UV protectant yet. Was wondering what I did wrong and whether I should try another coat of PlastX or use the UC to remove it and try again.

Murr1525
Aug 7th, 2011, 08:42 PM
The UC and PlastX work a bit different.... I'd stop after the UC if you liked it, then wax or UC protectant.

LeMarque
Aug 7th, 2011, 08:45 PM
What are you doing up so late? :)

So just use UC again or remove the PlastX with ...?