PDA

View Full Version : PC 7336sp?



Fervidsea
Aug 1st, 2005, 05:18 PM
I recently received a PC 7336sp as a gift and was wondering about the shaft. The unit didnt come with a shaft. The sanding polishing pads have the shafts attached. Where can I get one so that I can use the Megs pads?

Thanks

Mike Phillips
Aug 1st, 2005, 05:23 PM
Here's a link to the Meguair's backing plate...

Dual-Action Polisher Backing Plates (http://www.meguiars.com/estore/product_detailpage.cfm?product=Dual-Action-Polisher-Backing-Plates&sku=W-DA)

http://archive.meguiarsonline.com/gallery/data/500/1008Dual_Action_Backing_Plates.jpg

Fervidsea
Aug 1st, 2005, 05:32 PM
Thanks Mike, pciture I was looking at didnt appear to have the shaft.

the other pc
Aug 2nd, 2005, 08:05 AM
You can get the WDAV99 DA Velcro Buffing System (http://meguiars.com/estore/product_detailpage.cfm?product=DA-Velcro-Buffing-System&sku=WDAV99&sectionID=38101) which comes with one W64DA Backing Plate and three 6.5” polishing pads: two polishing pads and one finishing pad, all for one low price.


PC.

Mike Phillips
Aug 2nd, 2005, 08:10 AM
Originally posted by Fervidsea
Thanks Mike, pciture I was looking at didnt appear to have the shaft.

If you look carefully at the center of the backing plate, you can see the 5/16 fine thread shaft which is what the dual action polisher uses.

http://archive.meguiarsonline.com/gallery/data/500/2backingplate.jpg