Hi.At last got some time to repair my front/side-position/indicator light housing.
I decided to remove from the car as there was quite a lot of dirt/algae around the rim and they were a bit dirty inside too.Cleaned with heavy duty soap and dried out with air compressor.
1] A picture of the scratch.
2] Wetsanded with 1000
3] Wetsanded with 1500
4] wetsanded with 2000
5] Polished by hand with PlastX
6] Finished and back on car.
Actual working time 45-60mins.
PlasticX gave a real good polish at the end.Even by hand.
I decided to remove from the car as there was quite a lot of dirt/algae around the rim and they were a bit dirty inside too.Cleaned with heavy duty soap and dried out with air compressor.
1] A picture of the scratch.
2] Wetsanded with 1000
3] Wetsanded with 1500
4] wetsanded with 2000
5] Polished by hand with PlastX
6] Finished and back on car.
Actual working time 45-60mins.
PlasticX gave a real good polish at the end.Even by hand.
Comment