We're color sanding a freshly painted 1950 Pontiac with 3000 grit. It's a black pearl base with 2K clear from Summit (low VOC). I only have experience with the old G100 so my plan is to first use M105 on a yellow pad with speed at 5. Afterwards I plan on chasing it with M205 on a yellow pad with speed at 5. What do you guys think?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Feedback for my plan of attack...
Collapse
X
Comment