Tweet
I watched the video on how to clay the car, and the one point I wanted to interject is how I check the feel of the surface for contaminates. While the method shown in the video may work for really bad paint surface conditions, I find the best method is to use a sandwich bag. Put your hand in the bag and gently run you finger tips over the surface. If you feel little bumps, that is the contaminates. I retest each area after I clay it before moving on to a new area. If it is not 100% smooth. I re-clay that area.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Testing the Surface Before Claying
Are you asking for advice or just telling us your method? -
Re: Testing the Surface Before Claying
Sorry, but just trying to pass on a little more info on testing to see if you need to clay a car.Originally posted by Flash Gordon View PostComment
Comment