• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Help with stains

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with stains

    Hi everyone, I just got a new car and the dealer saif not to use and wax or polish for a year. I found some rust stains from dripping water on the hood of my car, I tried removing it with some ZIP wax car soap and a soft cloth and got most of it out, but there's still a slight discoloration on the hood. Can anyone recommend anything to take the rest of the stain out, and/or remove fine scratches caused by buffing?? And does anyone know if rust water can hurt the clearcoat?


    Any help is greatly appreciated.

    Mike

  • #2
    Sounds like bad dealer advice to me. There is nothing wrong with cleaing/polishing/and waxing a new car. Even a fresh repaint only needs 3 months.

    Anywho, give these threads a read first, to make sure we get you going in the right direction with the basic information:

    Meguiar's 5-Step Paint Care Cycle

    Step 1 Wash

    Step 2 Clean

    Step 3 Polish

    Step 4 Protect

    Step 5 Maintain

    Suggested Products for Taking Care of a New Car

    What it Means to Remove a Scratch

    How To Remove Swirls By Hand

    How to remove a defect by hand with ScratchX

    So, after reading those, you can do a basic 5-step process like this:

    1. Wash - Gold Class wash or Nxt wash. Good quality sponges / towels, and the 2-bucket system.

    2. Clay - Smooth Surface Clay kit

    3. Clean - Might need ScratcHX on the stains, and and scratches. Deep Crystal #1 for the rest.

    4. Polish - Deep Crystal #2 is a good place to start.

    5. Wax - Gold CLass or Nxt wax are good starts, or DC#3. And even #21 Synthetic Wax now that it is in a 16 oz bottle. Remember 2 thin coats is best.

    Or, to short cut things a little, you could:

    1. Wash - as above

    2. Clay - as above

    3. ColorX - This is a great cleaner/wax.

    4. Wax - Gold Class, Nxt, #21, etc.

    The nafter future washings, you cna maintain the look with a spray detailer or a spray wax:

    How to Get Great Results Using Meguiar's Spray Waxes

    And there is no possible way that rusty water spots can be good for your paint.
    Last edited by Murr1525; Jul 23, 2006, 04:53 PM.
    2017 Subaru WRX Premium - WR Blue

    Comment


    • #3
      thanks so so much for your advice, I'm going to give it a try.

      Mike

      Comment


      • #4
        Seems a very odd recommendation for a new car, unless you bought the paint sealant/interior protection package from the dealer. I hope you didn't, but even if you did you're just fine giving a brand spanking new car the full treatment - wash, clay, polish, wax.

        Dealers! Silly boys sometimes!!
        Michael Stoops
        Senior Global Product & Training Specialist | Meguiar's Inc.

        Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

        Comment


        • #5
          Re: Help with stains

          Originally posted by mdanca
          Hi everyone, I just got a new car and the dealer said not to use and wax or polish for a year.
          You would think someone that works in the auto industry would know more than this but sad to say this is probably more of the norm than the exception.

          I found some rust stains from dripping water on the hood of my car, I tried removing it with some ZIP wax car soap and a soft cloth and got most of it out, but there's still a slight discoloration on the hood. Can anyone recommend anything to take the rest of the stain out, and/or remove fine scratches caused by buffing?? And does anyone know if rust water can hurt the clearcoat?


          Any help is greatly appreciated.

          Mike
          Murr1525 answered the rest of your questions, but just to add a little more, the ScratchX paint cleaner should take care of those stains, just remember that it's a paint cleaner, not a paint protectant, so after you use any paint cleaner or polish for that matter, it's important to then apply a coat of wax to protect the paint.
          Mike Phillips
          760-515-0444
          showcargarage@gmail.com

          "Find something you like and use it often"

          Comment


          • #6
            Moving out of Hot Topics and into Detailing 101
            Mike Phillips
            760-515-0444
            showcargarage@gmail.com

            "Find something you like and use it often"

            Comment

            Working...
            X
            gtag('config', 'UA-161993-8');