Tweet
Anyone using Meg. #4 on there vehicles to remove scratches?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
are you working by hand, DA or rotary?
to remove scratches by hand your best bet is to use ScratchX
How to remove a defect by hand with ScratchX
if your working with the DA
Using the G-100 to remove swirls with the Professional Line
the reading above should help you decide what you need to remove swirls and scratches from your paint Meguiar's #4 is designed to be used with a rotary buffer. If you don't have any training with the rotary you could potentially damage the paintPatrick Yu
2003 Honda Accord
2008 Honda Accord EX-L V6
-
Hey,
Just to add to Sneek's post. Meguiar's #4 Heavy Cut Cleaner was designed with single stage paint in mind. It uses a very different diminishing abrasive that works very well for removing severe defects. It is a rotary only product. It requires the rotary to break down the abrasives properly.
What type of finishing are you working on? What pads are you using with the rotary?
TimComment
Comment