Hello again guys, I am getting so psyched. My gf ordered the G100 from www.autodetalingsolutions.com for $149 with the backing plate, and 8006 foam pad. Now I need to decide a few things. I am getting a few microfibers (fresh and new) for the job but would you get a second 8006 pad?
The car is the following and I am trying to decide between 80 and 83.
2005 Toyota Matrix XR AWD
Black Sand Pearl
-Light to Moderate swirls on car. Rear tailgate is the worst part. Small chipping on hood which I may not be able to do much about.
My concern is that 83 will be to harsh, but I am also concerned that 80 will be to light. After using Scratch X, Paint Cleaner and Polish (Steps 1 & 2) by hand, car is clean but swirling remains. Using the G100 when I get it with the 8006 pad, but still unsure. I can take pictures if you like. Help!
The car is the following and I am trying to decide between 80 and 83.
2005 Toyota Matrix XR AWD
Black Sand Pearl
-Light to Moderate swirls on car. Rear tailgate is the worst part. Small chipping on hood which I may not be able to do much about.
My concern is that 83 will be to harsh, but I am also concerned that 80 will be to light. After using Scratch X, Paint Cleaner and Polish (Steps 1 & 2) by hand, car is clean but swirling remains. Using the G100 when I get it with the 8006 pad, but still unsure. I can take pictures if you like. Help!
Comment