Tweet
today i wax my car with nxt liquid, for half of the car i use a foam pad, the one that comes with the nxt bottle, and for the other half of the car i use a microfiberpad, i noticed that with the foam pad take less time to wax the car, and with the microfiber pad i noticed that is a little hard to work and take more time, but... with the microfiberpad is so much easy to apply a very thin coat like is supposed to apply the wax, im correct or im doing something wrong,//? any of you noticed the same thing???
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: foam pad versus microfiber pads!!!
You may be using more product on the foam pad that you need to. Using either pad is fine but as you've found out the techniques may be a bit different. In the long run the important thing is to apply a nice, thin coat. If you find you can do that easier with the microfiber pad, then so be it.Michael Stoops
Senior Global Product & Training Specialist | Meguiar's Inc.
Remember, this hobby is supposed to be your therapy, not the reason you need therapy.
Comment