• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

As anyone used or know anything about a cornwell rotary

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    As anyone used or know anything about a cornwell rotary

    like the title states.
    wanting info on a cornwell #227 polisher/sander
    how does it compare to a makita 9227C or a dewalt DW849
    does anyone know what the amps are?
    what the weight is?
    what the variable speeds are?
    does it have a soft start?
    I've tried to find out all these and other things but can't even find info about it on the cornwell site GO FIGURE
    Going to be polishing aluminum with it and what to know if it will hold up to the higher demand of pressure and force and hours of use! or should I just get the makita or dewalt.
    thanks for any help that can be given.
    ''USE THE LEAST AGGRESSIVE PRODUCT TO GET THE JOB DONE RIGHT''
    You Don't Know What You Can Do Until You Try '' TECHNIQUE IS EVERYTHING''
    Test Hoods Are Cheap And Most Of The Time Free
    Tags: None
  • #2
    Re: As anyone used or know anything about a cornwell rotary

    I'd contact them, here's some info...
    • Cornwell Tools
      667 Seville Road
      Wadsworth, Ohio 44281-1094
      Tel: (800) 321-8356 or (330) 336-3506
      Fax: (330) 336-3337
    Joe's detailing (Since 2002)
    ''We begin where the car wash Ends.''
    (269)650-2242

    Comment

    Previous template Next
    Working...
    X
    gtag('config', 'UA-161993-8');