• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Isopropyl Alcohol Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Isopropyl Alcohol Question

    Originally posted by speed3blackmica View Post
    id have to say......nothing. just a good old stripping of wax.

    ive used IPA just straight out of the bottle with no bad effects at all.
    Thanks for confirming!

    I was wondering if reducing it 1:1 with water slowed down the evaporation rate thus giving additional time to wipe everything down so that the oils don't redeposit themselves back on the finish.
    BobbyG

    Comment


    • #17
      Re: Isopropyl Alcohol Question

      Originally posted by BobbyG View Post
      Thanks for confirming!

      I was wondering if reducing it 1:1 with water slowed down the evaporation rate thus giving additional time to wipe everything down so that the oils don't redeposit themselves back on the finish.
      That's exactly the right reason for dilution (it also make an inexpensive product even less expensive)
      ~ Providing unbiased advice that Professional and Enthusiast Detailer’s Trust ~ Blog – http://togwt1980.blogspot.com

      Comment


      • #18
        Re: Isopropyl Alcohol Question

        Wipe-Down Process

        The wipe down process should be carried out both before to ensure a surface that is free of any debris and after to ensure that defects have been removed as opposed to masked by any lubrication oils or fillers left behind after the polishing process. The wipe-down process may need to be repeated to ensure a perfectly ‘clean’, debris free surface

        After the paint surface has been subjected to a chemical cleaning its protective layer (s) have been removed and the paint surface left without protection, so it is very important that a wax or polymer protection be applied immediately.

        Methodology - Isopropyl alcohol (IPA) solution 1:1 with distilled water, if used undiluted it flash / dries (evaporates) rapidly, which lessens surface inspection time. Fill a fine misting spray bottle with a solution of 1:1 Isopropyl alcohol / distilled water, spray the paint surface, and agitate before wiping the paint surface with a clean, dry 100% cotton micro fibre towel( if it flashes too quickly (hot surface or environment) use further dilution)
        ~ Providing unbiased advice that Professional and Enthusiast Detailer’s Trust ~ Blog – http://togwt1980.blogspot.com

        Comment


        • #19
          Re: Isopropyl Alcohol Question

          what if i accidentally left isopropyl alcohol on the surface what would be the effect? will it damage the paint?

          Comment


          • #20
            Re: Isopropyl Alcohol Question

            Being an alcohol / water solution it will dry reasonably fast, no harm done
            ~ Providing unbiased advice that Professional and Enthusiast Detailer’s Trust ~ Blog – http://togwt1980.blogspot.com

            Comment


            • #21
              Re: Isopropyl Alcohol Question

              if isopropyl alcohol alone?

              Comment


              • #22
                Re: Isopropyl Alcohol Question

                Originally posted by ripple_effect View Post
                if isopropyl alcohol alone?
                What are you asking?
                BobbyG

                Comment


                • #23
                  Re: Isopropyl Alcohol Question

                  if i left a 70% isopropyl alcohol on the car's surface and left it to dry will it leave a mar on the paint's surface?

                  Comment


                  • #24
                    Re: Isopropyl Alcohol Question

                    It will remove some surface protection before it evaporates. Marring is caused by suface friction with little / no lubrication
                    ~ Providing unbiased advice that Professional and Enthusiast Detailer’s Trust ~ Blog – http://togwt1980.blogspot.com

                    Comment

                    Working...
                    X
                    gtag('config', 'UA-161993-8');