• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Order of Operations: Clay Bar or Scratches?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Order of Operations: Clay Bar or Scratches?

    Ok So I hit a deer but that is a long story.

    Basically I have lots of minor scratches on my hood. Most are just through the clear.

    Should I Claybar THEN go after the scratches? Or Vice Versa?

  • #2
    Re: Order of Operations: Clay Bar or Scratches?

    Yeah, clay first, then use a paint cleaner on the scratches.

    Hopefully they arent all too deep, and you can at least improve everything.
    2017 Subaru WRX Premium - WR Blue

    Comment


    • #3
      Re: Order of Operations: Clay Bar or Scratches?

      OK I'm new at this myself however I''ve just been reading how to get rid of swirl marks and they say clay then scratches.

      The way I see the scratches are in your paint work while claying only remove dirt sitting ON the paint. Check ScratchX out

      EDIT: Dam, Post sniped.

      Comment


      • #4
        Re: Order of Operations: Clay Bar or Scratches?

        Welcome to Meguiars Online!!

        As mentioned above clay first.
        Then Remove the Scratches with Scratch X, SwirlX , or Ultimate Compound.

        *****Remember start with the least aggressive method possible. (I listed the products from least to Most aggressive)****


        Then put on 1 or 2 coats of NXT 2.0 Tech Wax.
        Good Luck!!
        Have Fun!!
        Post Pictures!!
        Joel
        Firefighter/EMT-B
        Rejuvenation Auto Detailing
        "Satisfaction Guaranteed or Your Dirt Back!!!"
        '99 F-150

        Comment


        • #5
          Re: Order of Operations: Clay Bar or Scratches?

          Thank You All!

          Comment

          Working...
          X
          gtag('config', 'UA-161993-8');