• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Is this a D/A?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Is this a D/A?

    Don't believe I can post links yet so I will just type it out. Is this something comparable to the PC 7424 or GT110v2? Seems to good to be true for the price.

    Advanced Tool Design Model ATD-10511 7in polisher.
    Tags: None
  • #2
    Re: Is this a D/A?

    According to the 3rd review. from A, Whidding. He was at first disappointed that this was a rotary, not a d/a. So I would say it is a rotary.
    quality creates its own demand

    Comment

    • #3
      Re: Is this a D/A?

      This is a rotary buffer, and probably on par with the inexpensive one from Harbor Freight that is often discussed on detailing forums. It is most definitely a different tool than the G110v2, PC7424 or other dual action tools. The learning curve on this tool is far steeper than on the D/A and the potential for damage is far greater as well.

      There are several low cost rotaries on the market, but to find a cheap alternative to a good D/A usually means picking up something used on ebay.
      Michael Stoops
      Senior Global Product & Training Specialist | Meguiar's Inc.

      Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

      Comment

      Previous template Next
      Working...
      X
      gtag('config', 'UA-161993-8');