• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Problem with NXT 2.0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Problem with NXT 2.0

    Funny that I read this thread. I also just bought a 2011 Sonata and last night I applied a coat of NXT 2.0 with similar problems. Some spots I knew I put to much on and others was just right but had streaking. I ended up letting it dry for 2 hours and still had streaking. So I pulled out some quick detailer and a little bit on a clean micro towel and the streaks went away. I had purchased two x-mas gift packs from Target when they went on sale. I will wait and see what coat two brings. I spent two hours cleaning the car this weekend and this Morning to work it was raining.

    Comment


    • #17
      Re: Problem with NXT 2.0

      Using some clay and at least a cleaner/wax first can help the wax application go better as well. Nxt has some cleaners, but really wants a prepared surface.
      2017 Subaru WRX Premium - WR Blue

      Comment

      Working...
      X
      gtag('config', 'UA-161993-8');