Using an orbital buffer

[PD460SS]

Hi Guy's,

My 72 was restored about 18 months ago and I was and wax it on a regular basis. I would like to learn how to use a buffer along with what types of pads, glazing etc but I have never done it before. The guy that restored my car said you have to be careful when "rubbing out" a car because you can eventually take off the top coat. I don't know if he was telling me the truth or not.

Any feedback would be greatly appreciated.

Thanks,

Paul

[J. A. Michaels]

Re: Using an orbital buffer

Get yourself a G110v2. They are basically fool proof. There is a great video by Mike Phillips shows you step by step how to use it.

Of course you will need to order some pads. I like the Meguiar's soft buff pads v2.0 You mainly will need polishing and finishing pads. I like to also use a cutting pad with a microfiber bonnet for wax removal.

You could go over the counter and get Swirl-x, scratch-x, and ultimate compound. Or you could get the 105/205 products.

Theoretically you can go rub all the way through to bare metal. However, using the G110v2 very unlikely.

Hope this helps.

[Ravi_1992]

Re: Using an orbital buffer

Here's the links for Mikes PC videos

How to do a "Section Pass" with a Porter Cable 7424XP

Part 1 - How to remove swirls, scratches and water spots using a Porter Cable 7424XP Polisher


Part 2 - How to remove swirls, scratches and water spots using a Porter Cable 7424XP Polisher


These vidz are extremely helpful

[BobbyG]

Re: Using an orbital buffer

Welcome to Meguiar's!

The G110v2 seems to be a great DA polisher and has gained a reputation for quality, performance, and reliability. Mike Phillips has done quite a few write-ups on the subject of DA polishers and it would be time well spnt going through them and hear what he has to say.