• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

First time with Microfiber system

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    First time with Microfiber system

    I used my new Meguiar's microfiber system on my soft Mazda MX-5 paint. The finish is in very good shape so I only used the finishing polish and finishing pad. i was very pleased with the results. It went on easily, and I could have worked it for hours with no dusting which is great in the dry Utah climate. I tried to remove it (I'd done the whole back end and ran a quick errand so it had dried for about 45 minutes) with a Lake Country red pad but it balled or gummed up, so I just removed it with a microfiber cloth and that worked fine.

    I finished with a coat of Gold Class Carnauba and I'm very pleased with the results.

    I threw the pad in the washing machine with the other microfiber cloths and it came out great.
    Tags: None
  • #2
    Re: First time with Microfiber system

    I'm thinking of doing the exact same thing with my car, glad to hear it worked well. Our climate is almost the same as yours with the dryness.

    Comment

    • #3
      Re: First time with Microfiber system

      Glad to hear it worked.

      But dont try to remove products with a foam pad. You can remove products by machine by using a microfiber bonnet over a foam cutting pad.
      Tedrow's Detailing
      845-642-1698
      Treat Yourself to that New Car Feeling

      Comment

      Previous template Next
      Working...
      X
      gtag('config', 'UA-161993-8');