• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Re-painting after using Diamond Cut 2.0

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Re-painting after using Diamond Cut 2.0

    I am doing some detail airbrush work. I used Diamond cut 2.0 and have decided to make some changes. Is there any residues left in the paint that I should be concerned about before re-painting over an area?

    Thanks for any information!
    DC
    Tags: None
  • #2
    Re: Re-painting after using Diamond Cut 2.0

    Well, yes and no. It is a body shop safe, paintable product but it's always a good idea to use prop paint prep procedures to ensure any foreign substance is off the surface before shooting fresh paint. The good news here is that anything that might be left behind by this product is extremely easy to remove and any little hint of residue you may have missed shouldn't interfere with the painting. But we would never recommend that you polish an area, wipe with towel and then just start shooting paint.
    Michael Stoops
    Senior Global Product & Training Specialist | Meguiar's Inc.

    Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

    Comment

    • #3
      Re: Re-painting after using Diamond Cut 2.0

      Thanks for the help Michael!

      Comment

      Previous template Next
      Working...
      X
      gtag('config', 'UA-161993-8');