Tweet
I have a Meguiars DA buffer.
Is there any differences using the buffer to wax vs polish.
Amount on pad.
Speed setting.
Is there any differences using the buffer to wax vs polish.
Amount on pad.
Speed setting.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
-
-
Re: Different procedure in polishing & waxing
With polishing, you'll tend to want a higher speed, you'll use more product, more pressure, more passes over an area.
With waxing, you'll go to a lower speed, less product (at first may be closer to the same, then less as the pad gets saturated), less pressure, just a pass or two over the area. More like wiping with the machine.2017 Subaru WRX Premium - WR Blue -
Re: Different procedure in polishing & waxing
You will also use a slower arm speed with polishing, can usually go a fair bit faster with the waxing.Comment
Comment