• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

question on UQD

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    question on UQD

    hi guys,

    noobie question from me. I've tried to search the forum but didn't managed to find what I was looking for. Ok here goes. I've been using both UQD and UQW as a booster/top up for my ULW during my weekly washes. I always alternate between these 2 products for a top up after each wash. As i was using UQD yesterday, I happen to noticed that at the back of the bottle, it states that UQD contains IPA. to my understanding, IPA is able to remove wax. So when i use UQD as a top up, am I actually removing any LSP? Also, should i only just use UQW as a booster instead from now onwards? I would hate to not use UQD. I just love the beading it produces compared to UQW and ULW, although it doesn't last long due to the hot and humid weather in Malaysia. All advise is most appreciated. thanks
    Tags: None
  • #2
    Re: question on UQD

    That's interesting. I never noticed that on the bottle.

    The intent of UQD is to boost or add to your wax protection, so I can't imagine it would deplete it in any way.

    Would be interested to hear Meguiar's official view on this.
    Originally posted by Blueline
    I own a silver vehicle and a black vehicle owns me. The black one demands attention, washing, detailing, waxing and an occasional dinner out at a nice restaurant. The silver one demands nothing and it looks just fine. I think the black vehicle is taking advantage of me, and the silver car is more my style. We can go out for a drive without her makeup and she looks fine. If I want to take the black one out, it is three or four hours in the "bathroom" to get ready.

    Comment

    • #3
      Re: question on UQD

      The bottle of UQD I keep in my office doesn't say it contains IPA, nor does it mention any ingredients specifically. Maybe you have a different bottle?

      Comment

      • #4
        Re: question on UQD

        Wow, I will need to check on the back tonight. I have mine from Mid Valley, PJ.
        Anyway, I don't think UQD actually top up the existing Wax, it is clear water while UQW and Ultimate Wash & Wax anywhere are white in color which I believe they are the Wax.
        UQD boosts the Wax layers by adding the hydrophobic property and clean away the particles that have potential attack the Wax.

        Comment

        • #5
          Re: question on UQD

          Originally posted by yfwong View Post
          Wow, I will need to check on the back tonight. I have mine from Mid Valley, PJ.
          Anyway, I don't think UQD actually top up the existing Wax, it is clear water while UQW and Ultimate Wash & Wax anywhere are white in color which I believe they are the Wax.
          UQD boosts the Wax layers by adding the hydrophobic property and clean away the particles that have potential attack the Wax.
          i got it from there are well. Well, i'm not sure if topping up is a correct term to use, but UQD does leave a layer of polymers behind which is where you get the hydrophobic property, no? Speaking of hydrophobic effect, UQD is the best among all LSP products that I've tried so far. The water beads created are just lovely. I really love this product, not to mention the scent

          Anyway, I'm OCD about having paint protection, which is why I always ensure that I use either UQD or UQW after each wash, regardless of whether my ULW is still present or not.

          Comment

          • #6
            Re: question on UQD

            Just looking at my bottle...no mention of IPA.

            Bill

            Comment

            • #7
              Re: question on UQD

              Nope, no IPA. It is a great product. A bit pricey for me here, but it does perform we'll, and the polymers in ir does add more than enough protection. Shouldn't harm paint even when used regilarly

              Comment

              • #8
                Re: question on UQD

                IPA is often used to strip any compound or polish residue that might be left behind during the correction process in order to confirm that defects are indeed being fully removed and not just covered up. This is usually done with a 25% solution or even higher in order to fully strip these oils. It may surprise you to find out that, yes, Ultimate Quik Detailer does have a bit of isopropyl alcohol in it - around 2%. It's in there simply to aid with drying of the product due to the polymer load it contains, but it's nowhere near enough to start removing wax. And if you've got a synthetic sealant on your paint, including things like NXT Tech Wax 2.0 or Ultimate Wax, UQD doesn't have anywhere near the IPA content to make a dent in it.

                Now, as for using UQD and/or UQW immediately following a wash, we can see using one but not the other. UQD isn't meant to "last" in the sense that any wax or sealant will "last". It's there just to add lubricity to the surface to help you safely remove light dust or fingerprints. Yes, it does leave a bit of hydrophobic polymer on the surface, but that effect is very short lived. It is, after all, a quick detailer. If you've just washed your car, there isn't any dust on the surface to wipe off. If you want to use it to remove any light water spotting that might occur as water drips out from behind emblems, moldings, mirrors, etc, then fine - it works great for that. But if you want something to use all over the car as a matter of course immediately following a wash, then Ultimate Quik Wax is a much better choice.

                UQW has surprisingly durable polymers that will indeed last for quite some time. For a spray on wax, the durability is actually fairly remarkable. It works great when used while actually drying the car. Do a final sheeting rinse where you take the nozzle off the hose and just a let a smooth, steady stream of water run over the paint to sheet off the majority of water beads, and then spray UQW onto a panel immediately before drying that panel. Use two folded Water Magnet waffle weave drying towels, one for the initial wipe and the other for a final wipe. You'll lay down a nice coat of polymer protection while you're drying the car.
                Michael Stoops
                Senior Global Product & Training Specialist | Meguiar's Inc.

                Remember, this hobby is supposed to be your therapy, not the reason you need therapy.

                Comment

                • #9
                  Re: question on UQD

                  Thank you so much for the reply Michael. The UQD will go into my car from today onwards to be used as a QD That, and i need to order a gallon of D156

                  Anyway, I love both UQD and UQW. UQW is indeed remarkable for a spray wax. I love how it darkens the paint, giving it a wet and glossy look. But this is the first time I'm seeing that I can use it as a drying aid. I'll definitely try it out. Thanks for the tip. .

                  On durability, I tried out a trick that was recommended by a friend of mine and it really works. Durability of the UQW increases by a whole lot if you let it 'bake' under the sun for a couple of hours. Well, this is in Malaysia where it is hot and humid, not sure if its applicable for other countries

                  Comment

                  Previous template Next
                  Working...
                  X
                  gtag('config', 'UA-161993-8');