Applying Ultimate Polish and Ultimate Wax with DA Power System

[KidDetailer]

Re: Applying Ultimate Polish and Ultimate Wax with DA Power System

it says:

"Keep off vinyl, rubber, plastic, non -painted, porous materials, cloth or canvas"

this is a "small bottle" from the DA PowerPak Wax

[BillE]

Re: Applying Ultimate Polish and Ultimate Wax with DA Power System

I'm at a loss for words.

I use U Wax Liquid on ALL my plastic trim(s), even the pebbly stuff without any problems. I've never tried it on rubber parts.

I have to run out today, I'll stop by an auto parts store and see if the "bigger" bottles say the same thing.

Bill

[BillE]

Re: Applying Ultimate Polish and Ultimate Wax with DA Power System

Was unable to actually look at a bottle, they are inside a box .

I ask this kindly...are you sure you're reading the wax and not the polish? It does say, "do not apply..."?

Bill

[ShineOCD]

Re: Applying Ultimate Polish and Ultimate Wax with DA Power System

Will do,



Thanks Guz, will post pictures before and after the effect.

I will take a look at Ult. black. I'm going to use Ult. Lqd. wax for now and followed by Ult. qk. wax. (found old sealed bottle of Ult. quick wax in my garage with other Meguiars products)

It's lease and already spent on wash, wax, detail stuff close to $200) but again, I'm treating this as my own car

My wife has the same car, year and color. I used UC with a yellow pad on the black trim between the windows (A & B pillars) you asked asked about and it came out perfect. I'm sure UP would work as well if they are not scratched or swirled. Then applied Ultimate wax over them.

[The Guz]

Re: Applying Ultimate Polish and Ultimate Wax with DA Power System

it says:

"Keep off vinyl, rubber, plastic, non -painted, porous materials, cloth or canvas"

this is a "small bottle" from the DA PowerPak Wax

Here's the big bottle of UW that I have. This bottle is pretty old.





Here's the smaller bottle

My wife has the same car, year and color. I used UC with a yellow pad on the black trim between the windows (A & B pillars) you asked asked about and it came out perfect. I'm sure UP would work as well if they are not scratched or swirled. Then applied Ultimate wax over them.

Glad it worked out .