I did this when I was visiting my brother in Mooresville. I wanted to try my rotary. The truck was in really bad shape. Lots of swrils and scratches. I used 83 with 8000 polishing pad and then 82 with 9000 finish pad. You can see the rotary in the chair. Doing the sides you have to have a chair. It was a complete detail, but I only have 56k and it would take forever to upload all the pictures. This is before the #21, you won't believe it after.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
My First Rotary Detail
Collapse
X
-
Thanks everyone, and thank you Mike for the sample, don't know when I'll use it up.
2000, I put it on with the pc and a finish pad, a little really goes along way. Removed with MF. The 83 dries faster with the rotary. That red spray bottle is water that I would spray on the truck when it started to dry out. (just alittle)
Fidel, first detail, not time. I've been using it since Christmas, thats when I got it. My poor work truck has seen most of the use.
Thanks again to everyone for the kind comments.
I am going on vacation next week, stopping by my brothers on the way back. The have DSL so I will do a complete write up (with pictures) around Memorial Day.
Thanks again
Mark2005 Trailblazer LT Majestic Red Metallic
AutoGeek's 6th Annual Detail Fest & Car Show
1st Place-Best Overall Detail
3rd Place-Best of Show
March 26th, 2011
Comment
Comment