DCS Step 3 vs #26

[roushstage2]

What is the difference between these 2 products. I know they are both the high quality yellow wax, but what else differs between them?

[roushstage2]

Also, is #9/#26 a good combination?

And can #9 be removed with an orbital buffer with either a terry or MF bonnet?

[gb387]

Here is a great post on What are the differences between Meguiar's waxes.

You could remove #9 with your PC and a Microfiber Bonnet but... I feel it is easier to remove waxes with a PC and cleaners/polishes by hand. When using a cleaner/polish you apply it on a small area (say, 2x2) with you PC then remove before it dries. IMO, it can be a pain to keep removing you application pad from the PC and installing your clean pad with your bonnet, I find it time consuming in this case with the cleaners/polishes.

Now for a wax like #26, NXT, DC#3 and so on, I apply the entire car let it dry then change over to my clean pad with my bonnet and you are set to remove the wax.

Hope that helps!

[roushstage2]

That is what I was looking for. Thanks.

[gb387]

One more thing, I have used both #9 2.0 and #26(I like #26+NXt for lighter colors), I always keep them on hand. Both work great and are easy to use!