• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

using pads on both clear coat and single stage paint

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    using pads on both clear coat and single stage paint

    My wife got me a G100 for my birthday and I just used it on my Miata. It is a red 1990 and was repainted by a previous owner with a single stage paint. I also have a 2004 Black Mazda 6 Sportwagon that of course has a clearcoat paint. I was impressed at how well the Miata came out, being my first time and all. If I want to use a pad (7006) that I used on my single stage paint Miata first, on my 6 would that be ok? I have cleaned the pad and it appears that all of the product is removed, but there is some of the paint that has dyed the pad. Would any of the single stage red paint be transferred to the my 6?

    Thanks
    jonathan
    Tags: None
  • #2
    Re: using pads on both clear coat and single stage paint

    It’s no problem, go ahead and use the same pads on both.


    PC.

    Comment

    Previous template Next
    Working...
    X
    gtag('config', 'UA-161993-8');