• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Collapse
No announcement yet.

Backing Plate/Pads suggestions for the MT300?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Backing Plate/Pads suggestions for the MT300?

    Hey guys,

    I'm a novice that never touched a polisher before and I finally got myself the MT300.
    I was about to order the DMCKIT5 from Amazon (I live in Canada).

    Then I started wondering:
    Is the Micro fiber system being phased out?
    Is the DMCKIT5 kit the best for the buck accounting for the fact that I already have almost full bottles of Ultimate Polish and Ultimate Compound?
    Shall I pile up on MF pads in case they are no longer produced in a few months/years?
    Or should I rather go straight to foam pads and ignore the Microfiber thing altogether?

    What should a week-end warrior get to complete his MT300?

    I already own the DAPS system. I have heard that 3" MF pads are no longer available. Is it true?

    All suggestions welcomed.

    thanks,

    Crazy Vinny
    Tags: None
  • #2
    Re: Backing Plate/Pads suggestions for the MT300?

    As far as I know the microfiber system is not being phased out.

    Hard to say if it is the best kit. I will say that D300 on the microfiber cutting pads works well for those paints that are hard or in general have sever defects.

    My advice would be to test spot the paint and see what works. If you need more cut than a foam pad then the microfiber cuttings pads are a good choice.

    What you need to go along with the MT300 is a set of pads and a backing plate. Get yourself the 5" backing plate and the Meguiar's thin foam pads are great pads. It is always a good idea to have some microfiber pads for those times you may need them.

    To answer your question about the 3" microfiber pads, then yes they are discontinued.
    99 Grand Prix
    02 Camaro SS

    Comment

    • #3
      Re: Backing Plate/Pads suggestions for the MT300?

      Here is a link to a recent thread where Guz, I and others discuss multiple viable alternatives to the 3 inch MF pads.
      Anyone have experience comparing DA Microfiber 3" pads to 5 " pads - Car Care Forums: Meguiar's Online
      http://www.meguiarsonline.com/forums/showthread.php?65901-Anyone-have-experience-comparing-DA-Microfiber-3-quot-pads-to-5-quot-pads#bR8LKz3JLTAqOf5h.97
      General Auto Detailing Discussion. Participate in existing discussion or start a new thread with your question.

      Comment

      • #4
        Re: Backing Plate/Pads suggestions for the MT300?

        Thanks a lot for your answers guys.
        (especially for the tip on the 3" pads!)

        I'll shoot for DBP5 + DMC5 + DMF5 + Ultimate Compound and Ultimate Polish.

        I'll try it out in a couple of weeks and let you know how it turns out.

        Crazy Vinny

        Comment

        • #5
          Re: Backing Plate/Pads suggestions for the MT300?

          Vinny
          I wanted to share today's announcement from Meguiar's with you.
          NEW Announcement - 3" DA Microfiber Discs are BACK
          Read more at http://www.meguiarsonline.com/forums...zJeBs7u7sky.99

          Comment

          • #6
            Re: Backing Plate/Pads suggestions for the MT300?

            WOOHOO!

            Thanks for the heads up, Bear!

            Crazy Vinny

            Originally posted by Old Bear View Post
            Vinny
            I wanted to share today's announcement from Meguiar's with you.
            NEW Announcement - 3" DA Microfiber Discs are BACK
            Read more at http://www.meguiarsonline.com/forums...zJeBs7u7sky.99

            Comment

            Previous template Next
            Working...
            X
            gtag('config', 'UA-161993-8');