If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I couldn’t edit my post, sorry. I’m just wondering what to do to maintain the HCW. I’m planning to use the waterless system and have some ultimate fast finish on hand as well as a ceramic detailer. Which should I use after the waterless wash?
You're going to do best by maintaining with the new Hybrid Ceramic Detailer. This will also ensure you keep up the water beading properties of the HCW.
Brian Hann
Manager - Meguiar's Solutions Hub
Meguiar's Inc.
Irvine, California bhann@meguiars.com
(800) 854-8073 *3870
You're going to do best by maintaining with the new Hybrid Ceramic Detailer. This will also ensure you keep up the water beading properties of the HCW.
Thank you. I was thinking the same thing. Now I see my brain still sort of works
Can I use only the Spray as protection, without anything else before or after ?
Let's say wash the car and apply spray every month. Would that be protecting the car from the sun ?
Can I use only the Spray as protection, without anything else before or after ?
Let's say wash the car and apply spray every month. Would that be protecting the car from the sun ?
Hi Dtrip,
Yes, you absolutely can, however, for best results we would recommend establishing a foundation layer with one of our liquid or paste waxes, like now our new Hybrid Ceramic Liquid Wax.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
Good question! You should ask this in the Product Suggestion thread
Originally posted by Blueline
I own a silver vehicle and a black vehicle owns me. The black one demands attention, washing, detailing, waxing and an occasional dinner out at a nice restaurant. The silver one demands nothing and it looks just fine. I think the black vehicle is taking advantage of me, and the silver car is more my style. We can go out for a drive without her makeup and she looks fine. If I want to take the black one out, it is three or four hours in the "bathroom" to get ready.
I did the Meguiar’s Paint Protect last week after a clay and polish. Do I still need to do another foundation with the HCW, or would I be OK doing the spray and rinse? Thanks!
I did the Meguiar’s Paint Protect last week after a clay and polish. Do I still need to do another foundation with the HCW, or would I be OK doing the spray and rinse? Thanks!
You would be OK to do the spray & rinse.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
Meguiar's Hybrid Ceramic Wax is a very easy way to get durable Si02 / polymer blended protection on your vehicle. We have been getting a lot of questions on application, so this article will walk you through our recommendations.
Hybrid Ceramic Wax can be used as your main source of protection, but here at Meguiar's and for most of you enthusiasts which are likely reading this, we like to use it and suggest using it in addition to your favorite wax/sealant, or even on top of a coating.
There are a couple different ways to apply Meguiar's Hybrid Ceramic Wax:
Application Method #1 - INITIAL APPLICATION / FOUNDATION LAYER
Application Method #2 - SUBSEQUENT APPLICATION / WAX AS YOUR RINSE
We borrowed an employee's super cool Tesla Model 3 to make this article.
We started with a traditional wash, using the two bucket wash method. Washing of course, removes all loose contaminants.
Application Method #1 - INITIAL APPLICATION / FOUNDATION LAYER
For the first time using Meguiar's Hybrid Ceramic Wax, we recommend establishing a "Foundation Layer." Hybrid Ceramic Wax is simply applied in a "wax as your dry" style. See below:
After washing the vehicle thoroughly, & before drying, spray Hybrid Ceramic Wax across all exterior surfaces.
Thank you so much! I recently started using it and now this is my main protection.
Last edited by ThomasAbney; May 1, 2020, 01:36 PM.
Thank you so much! I recently started using it and now this is my main protection.
Sure thing! Takes a little getting used to & is a bit sensitive to how much product you use, i.e. don't use to much, but all in all a great product. There was a lot of engineering behind this one.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
Sure thing! Takes a little getting used to & is a bit sensitive to how much product you use, i.e. don't use to much, but all in all a great product. There was a lot of engineering behind this one.
So far I have applied Meguiar's Hybrid Ceramic Wax on our Travel Trailer and our 4 cars.
All first application and wiping dry using a Micro Fiber cloth.
I like this product a lot.
You mention to use sparingly and I agree. When I wipe over the wet surface and then wring out the cloth, I can see some blue wax being squeezed out. So, there is a lot of the Wax still on the damp cloth ready to spread around. Certainly the process is to get that base coating down and just wiping dry with the still damp cloth did it for me.
One of our vehicles is Black and it worked great on that dark color too.
All of them now have a nice shine and I am hoping well protected.
This is much easier than using traditional wax.
Can this be used on a coated car (Gtechniq CSL + ExoV4)? Or will it mask to properties of the coating? Is the ceramic detailer better suited for this?
Hybrid Ceramic Wax Spray, Hybrid Ceramic Detailer & our new Hybrid Ceramic Wash & Wax are great for boosting water beading performance / protection on coated cars.
So far I have applied Meguiar's Hybrid Ceramic Wax on our Travel Trailer and our 4 cars.
All first application and wiping dry using a Micro Fiber cloth.
I like this product a lot.
You mention to use sparingly and I agree. When I wipe over the wet surface and then wring out the cloth, I can see some blue wax being squeezed out. So, there is a lot of the Wax still on the damp cloth ready to spread around. Certainly the process is to get that base coating down and just wiping dry with the still damp cloth did it for me.
One of our vehicles is Black and it worked great on that dark color too.
All of them now have a nice shine and I am hoping well protected.
This is much easier than using traditional wax.
Thank you for taking the time to join our discussion forum and let us know about your great experience! I would agree, I personally like the product a lot also. It is delivering some super potent protection & water beading characteristics in such an easy application.
Thanks again for sharing.
Nick Winn
Product & Training Specialist | Meguiar's Online Forum Administrator
Meguiar's Inc.
Irvine, CA nawinn@meguiars.com
Comment