Here is a 96 cobra I just finished up for a car show this weekend. I have done it before but it was all by hand and was just a basic wash and wax. The paint was in horrible shape even after I was done. This time i did a full blown detail on it. Exterior/interior/engine. Ran out of time and did not get any interior shots.
Process:
2 passes with 105 on a megs yellow wool pad
2 passes with 205 on a yellow soft buff pad
1 pass with a 2.0 finish pad
2 coats nxt about 8 hours apart
Before:
After:
Some reflections: Almost impossible to keep the dust off
Thanks for viewing!!
Process:
2 passes with 105 on a megs yellow wool pad
2 passes with 205 on a yellow soft buff pad
1 pass with a 2.0 finish pad
2 coats nxt about 8 hours apart
Before:
After:
Some reflections: Almost impossible to keep the dust off
Thanks for viewing!!
Comment