Hey everybody, this is my first post on MOL (other than the pictures), though I've been active on the Genesis forums. I want to thank the admins and experts posting here for helping me indirectly (while lurking threads for weeks) in deciding what products to buy and what techniques to try. It can be very confusing! Many of my comments below are with that in mind. Scroll down for some pics of my recent correction, but first, here's my updated shelf list and methods:
REGULAR WASH
PAINT CORRECTION DETAILING
REGULAR DETAILING
INTERIOR CARE
BY THE WAY
Thanks
REGULAR WASH
- Wheel Cleaner Spray (especially for brake dust, also for underbelly)
- Two Buckets (sudsy and plain water) & Typical Microfiber Mitt
- Wash-n-Wax Soap (use AmourAll, Meguiar's, Mothers, Rain-X, etc)
- Microfiber Towels for Drying to prevent hard Water Spots
- Tire Shiner (I try different ones when they run out, or disappoint)
- Meguiar's Ultimate Black (outstanding for plastic trim)
PAINT CORRECTION DETAILING
- Meguiar's Clay Kit with Quick Detailer as "lube" (after washing)
- Meguiar's ScratchX (occassional deeper scratches, by hand)
- Fine point Brush & Factory Paint Sample (for paint chips, by hand)
- Porter Cable 7346SP (similar/upgrade from 7424XP, Home Depot)
- Meguiar's W67DA 5-inch Backing & 6.5-inch Soft Buff DA Pads (Summit)
- Meguiar's Ultimate Compound -->> Burgundy-Cutting DA Pad
- Meguiar's Ultimate Polish -->> Yellow-Polishing DA Pad
- Meguiar's Gold Class Liquid Carnauba Wax -->> Beige-Finishing DA Pad
- Microfiber Towels & Chamois for Product Removal, Buffing
REGULAR DETAILING
- Meguiar's Gold Class Quick Detailer (between washes, matches wax)
- Meguiar's Gold Class Quick Wax (between corrections, matches wax)
- Microfiber Towels & Chamois for Product Removal, Buffing
- California Duster (for pollen, light dust, etc)
INTERIOR CARE
- Meguiar's Ultimate UV Protectant (spray)
- Meguiar's Rich Leather Cleaner/Conditioner (spray)
- Windex, Dawn, as needed for windows, spills, etc
- Typical Reflective Sun Shades
BY THE WAY
- Car is not garage-kept , I currently don't use a cover , and it's black-on-black
- I live in the hot Southeast, with baking humid Summers and forgettable Winters
- Snow is very rare, rain is average to heavy Gulf moisture and non-acidic in my area, yielding a spot-free rinse if sitting, but a dirty mess if driving
- Pollen can be like a sandstorm in the Spring, tree sap and pollution are "normal" for the Southeastern US
- During 2012 the car was new and I was washing every week (great product and mitt, but single bucket), waxing every month or so, but the swirls and other defects caught up with me
- I've leaned toward Meguiar's over the years because you have a full system all figured out, and are readily available in stores for the most part - but others may like Lake Country, Chemical Guys, Adams, Mothers, and so on
- My prejudices (um, "lessons" from previous cars) are to avoid overly aggressive or cheap products like Turtle Wax compound or ArmourAll's classic protectant
- These pro-quality supplies cost around $350 USD
- Liquid products should last a year or more, Porter Cable & pads indefinitely, so yearly costs should be $100 or less
- Professional paint "blending" (basically air-brushing) is the best low-cost option for yearly-or-so paint-matched perfect touch-ups from accumulated rock chips and whatnot
FIRST PAINT CORRECTION (Feb 2013)
- BTW, the correction pics are on the small side because it's a pet peeve when people post huge photos right off their camera into a forum. They're otherwise unmodified.
- I probably could have been more thorough for each panel, but I was getting my feet wet on a lot of new product, this took place over three afternoons and my back was giving out, and only the front clip needed the full treatment, anyway, so I skipped only the compounding step for everything behind the windshield.
- The biggest difference for me on this car wasn't the visual change from the correction, but the way the surface feels and protects. Before I clayed each panel, some areas felt like fine sandpaper, and had the traction of rubber, even after a recent waxing, but now, after this full clay, compound in some areas, and the polishing and waxing on all areas, the surfaces feel like a smooth wet velvet, almost like a non-stick coating!
- I also tried the Ultimate Black on the exterior plastic/rubber trim, and it transformed the dry-ish surfaces into new. Wow!
Thanks
Comment