PDA

View Full Version : Machines - The Dual Action Polisher



Pages : 1 [2] 3 4 5 6 7 8 9

  1. g100 loudness
  2. G-100 Power Requirements
  3. Pad Advise for PC
  4. 7006 pad Mushrooming
  5. G100 vs G100A
  6. What combination?
  7. Benefits of PC?
  8. DA Polisher Product questions.
  9. G100 on the way
  10. Velcro from pad fell off
  11. Motor burnout for G100A?
  12. What's the difference?
  13. Removing Sand Marks
  14. polish or not?
  15. Amount of pressure
  16. Backing plate w/ g100?
  17. Newbie buying a PC!!! Please help
  18. Actual weight of G100????
  19. The Definition of Slow Arm Movement using the DA/PC
  20. Softbuff Buffing Pads
  21. Having Various Pads
  22. New to the G-100
  23. Pad Choice - Deep Crystal (Step 2) vs. Showcar Glaze #7
  24. Looking for a used G-100.
  25. 6.5 or 8 inch?
  26. Need some hand-holding.
  27. G100A or Equivalent and Accessories Needed
  28. Scratch removal with PC?
  29. X or 0 Pattern
  30. DA + Pure Polish
  31. DA Pad Prep before use
  32. snappy clean ?
  33. G100A vs PC 7336
  34. Pads & Products
  35. Hey Mike
  36. take off #80
  37. MPPC by Cyclo!
  38. Spot Buffs Kit - WARNING!!!
  39. Get to order DA!!! What else do I need?
  40. Neglected & Damaged Vehicles
  41. How long to buff?
  42. One last question
  43. What else do I need with the Buffer?
  44. 7006 pad on a DAP
  45. DA Buffer Not Cutting Enough?
  46. Struggling with the DA
  47. Kinda confused on what to do after taking wax off with bonnet.
  48. need help, using DA on mom's new crossfire
  49. Gonna try out my new DA in the morning
  50. First use of DA!!!
  51. #16 with 4" pads?
  52. Newbie with PC
  53. Dual Action Polisher
  54. #80 to #7 still not perfect
  55. Do I need to hit this more than once with 83?
  56. pc7424 via retail?
  57. How's this deal?
  58. ? on backing plate vs. velcro system
  59. cylco or porter cable what's the best
  60. #7 Show Car Glaze
  61. #9
  62. G100 polisher questions (newbie)
  63. First time
  64. G100 arrived
  65. Using G100 w/ Nxt (liquid) wax questions
  66. Warranty Question
  67. Use of the handle on PC?
  68. Set of 3 pads - WDAV99-B
  69. How much of the pad needs to be in contact?
  70. G-100(A) at 220/240 Volts?
  71. G100 Available to the UK?
  72. first try with #80
  73. Backing Plate Size
  74. First G100 effort. Good and Bad
  75. Oh No, Cant' get the G-100
  76. 4" Carpet Brushes
  77. G-100 Question
  78. what now?? is this micro marring?
  79. Just got my G100...
  80. Results from PC use on my car.
  81. Who uses the handle on the PC?
  82. Fine Cut Cleaner
  83. Ready to place an order...what should I buy?
  84. having an issue with my DA backing plate
  85. Question about polishing a Mini Cooper
  86. wanted to give a special thanks to jorge@meguiars
  87. help with package I have
  88. Rent A Dual Action Polisher
  89. Am i putting to much Pressure???
  90. Backing plate(s)
  91. Most aggressive product to use with the PC
  92. G100
  93. G100 on Black
  94. I made a clean spot...
  95. cleaning step with DA?
  96. Sonus Pads OK with Meguiars products?
  97. Whats Meg's recommendations for 66 with a D/A
  98. G- 100
  99. How much wax/polish do I apply to the pad?
  100. Still struggling...
  101. Problems with #80
  102. PC or Rotary
  103. New motorcycle paint...
  104. What split this pad??
  105. Whats the W-7006 pad for?
  106. City tools orbital buffer
  107. first time using g-100
  108. Just got my g100 in mail...uhhhh
  109. The G-100 and a 2005 Mustang GT
  110. PC/G100 possible damage
  111. Marine Use
  112. LA & Las Vegas?
  113. Pc7424
  114. First time G100 results
  115. Backing plate Failure?
  116. Woo-Hoo !!!! Look what came in the mail!!!
  117. Product Pad And Speed Etc..
  118. First use of G100
  119. Buffing near and around high points
  120. Portable G-100
  121. Fist Time Using PC7424
  122. First time using the G100. Take a look!
  123. Just Bought a PC7424
  124. Pressure
  125. SOFTBUFF™ Cutting Pad
  126. backing plate question
  127. how much does the G-100 cost?
  128. Need a backing plate for my Makita BO 6040
  129. DVD - How to use the PC for showcar results...
  130. Orbital Buffer with Pin Striped Car
  131. using deep srystal polish with g100
  132. Hey Mike P..A ???? about the g100
  133. Pad Question
  134. How to apply 80/83/21 in hard to reach areas
  135. No results....
  136. Quick G100 question.
  137. Porter-Cable 7424 or G-100A?
  138. polisher ??????
  139. which machine
  140. Question about diminishing abrasives...
  141. W8006 and M83 just not "cutting" it
  142. G-100 is here!
  143. Porter cable 7424 VS Meguiars g-100
  144. W8006 and Removing Wax.
  145. upcoming Audi detail
  146. Just Recieved G100-Ready to Rumble!!
  147. I need a fresh set of eyes on this please.
  148. newbie - paste wax question
  149. The 3-5-5 "Rule of Thumb"
  150. Took the PC plunge...NEWBIE
  151. Wax and pad for furniture
  152. Removing Paint
  153. Guidance and suggestions
  154. Broke the ice and a few questions
  155. Qusestion on Technique
  156. G100 back plate ?
  157. MF Bonnet for removal of products
  158. I had an epiphany! DACP thread
  159. What am I doing wrong? (PIC)
  160. Removing #16 with the G100
  161. cutting out, no power
  162. NXT Tech Wax with W8006?
  163. megs cleaner wax with g100?
  164. First use with PC
  165. Where to purchase the G100
  166. help with dacp
  167. How many pads to clean and use
  168. Did I buy the right products?
  169. Pneumatic vs Electric DA
  170. G100a warranty transferable?
  171. How to detail a new vehicle with the G-100?
  172. some G100 advice needed, please help
  173. G100 kits from ADS
  174. Porter Cable 7336sp
  175. Need help - what products to buy & seeking tips for a PT Cruiser's soft paint?
  176. Which speedsetting is which speed?
  177. 4" pads
  178. Using the PC for show car results DVD
  179. Mini Cooper Stripes & g100
  180. Time Needed To Do A Proper Job w/G100
  181. Buffer Broke
  182. DA speeds
  183. Just making sure.
  184. Shocked.
  185. I thought I had it right
  186. Am I doing something wrong?
  187. Strange Problem
  188. #81 difficult to remove?
  189. How to get out all of the spiderwebs??
  190. Few questions...
  191. Removing Scratches - advice on technique needed!~
  192. question about PC and Rotary
  193. Showcar results with PC DVD
  194. g100 accesories
  195. 1999 Honda CRV and my new G100
  196. Using the 7006 pad on paint.
  197. M1708 and M 1008
  198. Working time with #83 and 8006 (by G-100)
  199. Applying NXT wax w/G100 more effective than by hand?
  200. Pad problems...
  201. 2001 ZO6 Detail...(56k take a nap)
  202. Time In Each 2x2 Square
  203. Very Impressed
  204. Red 7 after DA workout
  205. g-100 vs porter cable vs griot
  206. Pads
  207. Very new car and G100, what products?
  208. G100 for Australia
  209. i ilke this one , (Cordless) Meguiar's G100 Dual Action Polisher
  210. G100 vs orbital + foam pad
  211. Reusing Applicator Pads
  212. can i use meguiars pads with Makita BO5021 ?
  213. First Time With the PC
  214. M85/m21
  215. Finally made the purchase!!!
  216. Is this a good setup plus some
  217. G100 and Backing Plate Threads
  218. Does this Porter Cable 93766 kit make more sense than the 7424?
  219. G-100 and Technique
  220. G100 European version
  221. Cookie-cutter effect on W8006 pad
  222. Question about different PC's
  223. Possible alternative to the G100?
  224. Wax, Glue-like on the surface, very difficult to remove
  225. Motorhome revisited......
  226. Product Abrasivness scale and G-100
  227. Help with G100
  228. Anyone use the pc backing plate
  229. Taped off areas - post steps
  230. Would a PC be good for a newbie like me?
  231. told by a detailer to us an OB for waxing not a PC
  232. Pad for Porter Cable DA Polisher
  233. A few questions...
  234. Jeep Wrangler Problems
  235. When in doubt...MASK it!
  236. Is my PC broken?
  237. Cutting Pads with the PC - Good idea?
  238. Bonnet Question
  239. How to fix Hazing/swirls
  240. G100 vs G100a
  241. Next best thing? Help
  242. pc and clear flaking off
  243. Can Meguairs in US ship the G-100 to Asia ?
  244. PC and Meguiars G100A
  245. HOW TO: Spindle/Bearing Assy Repair
  246. Short path to getting started?
  247. Bosch GEX 270AE random orbit buffer
  248. How to use the pc?
  249. What cleaner/polish/wax arsenal should I get to go with my DAP?
  250. tempted to buy G-100a