PDA

View Full Version : using multiple products



marko123
Nov 20th, 2009, 09:32 AM
hi can you use m#7 then m#26 and finish with nx 2.0 or is the first two enough
thanks mark

TH0001
Nov 20th, 2009, 09:37 AM
If you wanted to use those three products in combination, I would recommend #7 first, then NXT, and finally #26.

NXT is fully synethic so it should be applied prior to M26 if you follow common logic. Sealant before Carnuaba.

I would do one half of your hood with M7, NXT, M26 and the other half with just M7, M26 and compare them. See if you see a difference in how they look or how they hold up, then go form there.

sleepy
Nov 20th, 2009, 09:41 AM
Using M07 and then m26 would be a great choice. Since M07 is a pure polish with a good wax like M26. Or using the M07 with the NXT.2, which is what I use on my personal vehicles. is also a great choice. Using all three is up to personal choice. I personallly think you would not gain anything using the two waxes on top of one another.

Murr1525
Nov 20th, 2009, 12:10 PM
2 thin coats of wax is recomended, so you can certainly combine them to get that.

Perhaps your best bet would be to do a panel in each combination, and see which you like best.