PDA

View Full Version : need help making a $50 order



mustangless
Dec 14th, 2004, 05:05 PM
I am really thinking about ordering the g-100 packaged that if is ordered with 50 dollars worth of stuff free shipping.

So what should I order with it?
I know I need the strongest scratch remover. So I think I also need a weaker one too or a polish?
I am also thinking about ordering another pad but not sure which one. Can you guys help me get around 50 and not to much over?

Chris Nemlich
Dec 14th, 2004, 05:10 PM
The G-100 comes with one polishing pad. I would suggest getting a set of three pads (1 finishing, 2 polishing). You should use a seperate pad for each product you use.

Set of 3 pads - WDAV99-B (http://www.meguiars.com/store_meguiars/product_detail.cfm?sku=WDA)

http://www.meguiars.com/store_meguiars/images/product_wda.gif

$24.95

:xyxthumbs

Chris

gb387
Dec 14th, 2004, 05:14 PM
Originally posted by mustangless
I am really thinking about ordering the g-100 packaged that if is ordered with 50 dollars worth of stuff free shipping.

So what should I order with it?
I know I need the strongest scratch remover. So I think I also need a weaker one too or a polish?
I am also thinking about ordering another pad but not sure which one. Can you guys help me get around 50 and not to much over?

Well as for pads I really like the Finishing Pad (http://www.meguiars.com/store_meguiars/images/product_w90.gif), I am getting to like it better than the polishing pad so might think about picking one of them up. You can ALWAYS use more pads when you have the PC. There are lots of polishes out there so... I have had good luck with #81 hand polish (really like the #81!) as well as Deep Crystal #2.

I am sure others will chime in!