PDA

View Full Version : Is there a difference in the PC 7424 and the PC 7336?



evh5150
Feb 16th, 2005, 01:26 PM
I've been on the PC website and these look identical. The 7424 is listed as a "polisher" while the 7336 is listed as a "sander/ polisher."

gb387
Feb 16th, 2005, 01:39 PM
The only difference is the 7336 has a 6" counter weight and the 7424 has a 5" counter weight. Someone on this site has tested the two counter weights and found little to no difference in the operation of the machine there was a post on it some time ago.

evh5150
Feb 16th, 2005, 03:31 PM
Thanks. I'll try searching a little more the next time.

gb387
Feb 16th, 2005, 03:36 PM
Originally posted by evh5150
Thanks. I'll try searching a little more the next time.

no, no we are all here to anwer your questions any of them... I found the post for you. I was just trying to support my response.

Some of the stuff is burried in other posts and hard to find especially if you are new to the board.

check it out:
http://meguiarsonline.com/forums/showthread.php?s=&threadid=3330&highlight=Counter+weight

:xyxthumbs

PS Welcome!

gb387
Feb 16th, 2005, 03:40 PM
I see in your profile you have a Colorad ZQ8... awsome trucks. before I got my L the ZQ8 colorado was next on the list.

Post some photos if you can.

evh5150
Feb 16th, 2005, 03:49 PM
http://photobucket.com/albums/v301/evh5150/

Try this link.

gb387
Feb 16th, 2005, 03:53 PM
Originally posted by evh5150
http://photobucket.com/albums/v301/evh5150/

Try this link.

Now thats nice! I see one spot... foot prints in the bed!

:bigups

evh5150
Feb 16th, 2005, 03:55 PM
Yeah that was me. I used my step ladder after that. Thanks. I looked at your pics of your Lightning. Nice truck you have.