View Full Version : Porter-Cable 7424

Feb 21st, 2005, 02:52 PM
Since I've been looking to buy all my things from Meguiars to get ready to detail my car this spring, I wandered into this forum. I saw in a post someone say that the Porter-Cable 7424 was the same as the G100, and I am very interested in this because I don't really have the $225 to shell out. I looked at the 7424 and notice the lowest speed is 2500 OPM. Can anyone tell me if that will be okay, or what should I do? Thanks!


Feb 21st, 2005, 03:03 PM
Yes it is the same machine... I have the 7424 (has a 5" counter weight) there is also the 7336 (sold at Lowes with the 6" counter weight). The counter weights don't really matter. Here is a post to read on the counter weights: http://meguiarsonline.com/forums/showthread.php?s=&threadid=3330&highlight=Counter+weight

The G100 does have a lifetime warranty where the others do not.

Feb 21st, 2005, 07:36 PM
gb387 is 100% correct.
If a sale package on the g-100 comes up I would look into it if I were you. When my pc eventually goes, I am going over to a g-100 because of the warranty.

Feb 25th, 2005, 02:21 PM
So if I were to get the 7336 from Lowes than The Meguiars 6.5 inch pads will work just as on the G-100?

Feb 25th, 2005, 02:42 PM
I don't see why not. Just make sure that you get the 5" backing plate.
Dual-Action Polisher Backing Plates (http://www.meguiars.com/store_meguiars/product_detail.cfm?parentURL=index_pro.cfm&sku=W-DA)

Feb 25th, 2005, 06:14 PM
yep it will work the same.... you will need to pick up the backing plate as romulus suggested or try the DA System (http://www.meguiars.com/store_meguiars/product_detailpage.cfm?sku=W-DAV99&store=meg) that includes 2 polishing pads, 1 finishing pad and 1 backing plate.

Feb 25th, 2005, 06:39 PM
i am of the same verb as Lt1Corvette. i have a pc 7424 and use it all the time. in fact i am using it so much that i now wish that i would have purchased the G-100 from meguiar's just because of the warranty.. YOU CAN PAY NOW or PAY LATER.