View Full Version : Meguiar's #67 One Step Compound

Mar 29th, 2005, 09:50 AM
:xyxthumbs I have used other meguiars marine products faithfully for several years on my 53' Carver. Results were ok but not what I was looking for.

This year a switched to #67 instead of #49 and wow what a difference! #67 brought a clarity and shine I have not seen since the boat was new. I used a dewalt orbital buffer and a 50/50 wool/poly pad and switched to an orange foam pad after I had worn out my supply of wool pads. Followed this with meguiars boat polish and pure wax. The shine is stunning and the finish clear. I hope I can maintain it!

The one problem I had with the foam pads was a rapid build up of the compound that made them jump badly. This could not be cured by dry cleaning with a spur. The snappy clean product did clean them nicely and once dry they were reusable.

Great stuff that #67 Meguiars! :db:

When do you think we will see a NXT like product for boats?


Mike Phillips
Mar 29th, 2005, 02:48 PM
M67 is a very aggressive compound and very effective for going after serious below surface defects and gross oxidation.

Meguiar's One Step Compound (http://www.meguiars.com/store_meguiars/product_detailpage.cfm?sku=M-67&store=meg)


As far a an NXT line of products for Marine application, I have not heard anything and there is already a synthetic wax in the Marine line,


A - 1
Mar 29th, 2005, 09:14 PM

what is the snappy clean product you refer to?

Thanks, A - 1

Mar 30th, 2005, 05:08 AM
Snappy Clean is a product I found on several detailing sites that cleans wax and compound from wool and foam pads. Its available online at autogeek.com:coolgleam