PDA

View Full Version : Using G-100 To apply DC #2



jetta18T
May 20th, 2005, 09:38 AM
Does anybody know if DC#2 can be applied to the finish using a G-100 and 9006 finishing pad??? It wouldn't be a problem to apply it by hand but I'm just trying to see if this would be ok in order to save some time and energy. However, whatever will give me the best result is what I'll go with. Thanks.

Mike Phillips
May 20th, 2005, 12:05 PM
Yes, you can apply Deep Crystal Polish with the dual action polisher using either the W-8006 or W-9006 pads. Use a speed setting of 3.0 to 4.0