PDA

View Full Version : Meguiar's Professional DA Microfiber Correction System - New Video



Nick Winn
Feb 6th, 2017, 04:48 PM
Meguiar's Professional DA Microfiber Correction System was introduced in 2011 and changed the way defects can be removed with a Dual Action Polisher, delivering rotary-like cut, but with the safety & ease of use of a Dual Action Polisher.

We have a new video available to view covering some key tips to using this system.



https://www.youtube.com/watch?v=0KPF9Pr_Lvo

Feel free to post comments or questions. Thanks!

- Nick

pcfxer
Feb 9th, 2017, 03:58 AM
Meguiar's Professional DA Microfiber Correction System was introduced in 2011 and changed the way defects can be removed with a Dual Action Polisher, delivering rotary-like cut, but with the safety & ease of use of a Dual Action Polisher.

We have a new video available to view covering some key tips to using this system.



https://www.youtube.com/watch?v=0KPF9Pr_Lvo

Feel free to post comments or questions. Thanks!

- Nick

Excellent. I'm looking to refresh my supplies and pads for the spring!

greg0303
Feb 9th, 2017, 08:38 AM
This system has been a real breakthrough. Super easy to use and very effective. With addition of D302 it can be a 2-step or 3-step system now.

I even used it with forced rotation dual action polisher, Flex XC 3401 VRG, and the cut rate/defect removal was like using a rotary buffer:
http://www.meguiarsonline.com/forums/showthread.php?51191-DA-Microfiber-Correction-System-with-forced-rotation-dual-action-polishers&highlight=#k64Q

Meguiar's microfiber discs have become very popular with 15-21mm large orbit/throw polishers as well.

Shootist
Mar 24th, 2017, 10:41 AM
Noticed he did not prime pad completely when using the D301 Microfiber Finishing Wax. I remember an older video which said unlike a foam pad where the product will migrate to rest of pad, the microfiber will not allow product to migrate. What is the proper procedure?

drumdan
Mar 24th, 2017, 02:18 PM
This a brilliant system. Probably the easiest and most effective. Sometimes I wonder why I even try anything else...

Although M205 on a polishing pad, and M21 to seal is not a bad way to follow the intense cutting of the D300 with any of those microfiber pads.

Your system has turned my old school Porter Cable 7424 into a paint correcting Titan.

The Guz
Mar 24th, 2017, 09:46 PM
Noticed he did not prime pad completely when using the D301 Microfiber Finishing Wax. I remember an older video which said unlike a foam pad where the product will migrate to rest of pad, the microfiber will not allow product to migrate. What is the proper procedure?

Follow this write up and you will be good when using the DAMF system.

http://www.meguiarsonline.com/forums/showthread.php?47855-Using-Meguiar-s-D-A-Microfiber-Correction-System#LsIoWU0m3qGbr6F2.97

Shootist
Mar 29th, 2017, 09:15 AM
Follow this write up and you will be good when using the DAMF system.

http://www.meguiarsonline.com/forums/showthread.php?47855-Using-Meguiar-s-D-A-Microfiber-Correction-System#LsIoWU0m3qGbr6F2.97

Thanks!