PDA

View Full Version : Application of the new CLW



Vettefan
Jan 26th, 2020, 08:21 AM
According to instructions, the new CLW should be applied one panel at a time and allow 3-5 min to dry before removal. Question, can CLW be applied to miltiple panels at a time, or say half the car then removed? Are there any negatives or downside to this application method?

Thanks,
vettefan

topblissgt
Jan 26th, 2020, 06:14 PM
I can do most of if not all of the car and come back and polish off

Nick Winn
Jan 27th, 2020, 12:03 PM
According to instructions, the new CLW should be applied one panel at a time and allow 3-5 min to dry before removal. Question, can CLW be applied to miltiple panels at a time, or say half the car then removed? Are there any negatives or downside to this application method?

Thanks,
vettefan

Hi Vettefan,

Since Meguiar's Hybrid Ceramic Liquid Wax goes on very thin and may be a bit tough to see on certain lighter colored, vehicles, we recommend applying to 1 or 2 panels at a time, then coming back and removing it. This also means our normal "swipe test" doesn't work. If you prefer to try larger areas, you are not necessarily going to hurt anything, it may just be a bit more difficult application.

Vettefan
Jan 27th, 2020, 01:50 PM
Again... Thanks Nick.

Vettefan