PDA

View Full Version : Meguiar's Hybrid Ceramic Spray Wax - Rough Finish



Pilihp
Aug 28th, 2020, 08:23 AM
Looking for some advice regarding Hybrid Ceramic Spray Wax - I applied two coats as per the instructions, but the paint now feels very rough to the touch, particularly on the more vertical panels.

The car had been decontaminated with a fall-out remover, de-tarred, clayed and then polished through Scholl Concepts S3, S17 and S40 - it came up well, and the paint was very smooth to the touch with no protection.

I did have to buff off some wax marks/staining from the horizontal panels with a weak ONR solution, but beading seems quite good and it is fairly reflective. Even after a few washes, it is still grabby and rough. What can have gone wrong?