The soap I purchased is Meguiars Gold Car Soap. I forgot to add that.
kshutch00 Feb 21st, 2019, 01:06 PMI have been lurking around the forum for a few weeks reading things...watching youtube videos...trying to determine the best actions to make my car look
kshutch00 Feb 21st, 2019, 11:37 AMAgreed, this article below has a lot of information also. Have you seen it?
D/A Polisher Basics with Meguiar's MT300
Meguiar's at World of Wheels - Kansas City - 2/22 - 2/24
If you are in the Kansas City Missouri area make sure you plan on coming to hang
What is the question?
The speed settings for the Rupes 15/21 are on the back of the handle.
To minimize time spent on upkeep, use a long lasting wax on your wheels, such as Ultimate Wax. You'll then be able to do your wheels with the same product
BillyJack Feb 21st, 2019, 07:14 AMOk... Understand. Thank you. I think many new MT300 users would benefit from something like this on the forum for the new MT300.
Thanks,
Hi Nick,
If I wanted to strip ULW off and try a different sealant, how would you go about that? Would you always use apply a paint cleaner
Can I add a +1 that does not have internet?
Franklin Quach
I'll give that a go. I'm perplexed as the glass looks fine at all other times (i.e. no major scratches, hard water spots), but is hopeless in the rain
squelchy451 Feb 20th, 2019, 03:31 PMI do lots of quick details, and hurrying up since I can only detail when timing works out...
So, D143 will certainly be good for wheels,
I just bought a new Honda Odyssey and have come here looking for products that would be "good enough" for someone who wants to optimize the
Ekalb Feb 20th, 2019, 12:15 PMGladiateur1974, it might be helpful for the OP if you explain why you like a specific Rupes tool vs Flex.
Nick Winn Feb 20th, 2019, 11:32 AMHi, my 2004 mystic blue BMW has somewhat a rough clearcoat but it is still clear and adhered to the paint. Outside 24/7 it has toweling swirl marks, some scratches here and there, a little etching and some dryness. Wanting to remove the swirls, spidering and etching I used UC with the Drill DA and...
Last Post By: Atalanta Feb 21st, 2019, 09:38 PMHey everyone, I've been snooping on this website for quite some time and finally decided to join. You guys have some really great tips and tricks. And I love the debates. I am considering pursuing detailing as a part time gig. I've always had a "nak" for it. I bought the harbor freight dual action...
Last Post By: Selectchoice Feb 21st, 2019, 06:25 PM Number of Members: 53,967 Total Threads: 60,807 Total Posts: 556,741 Currently Online: 730 Newest Member: ilham_elek |
Re: HELP! Ultimate Compound harsh on BMW clearcoat
Uploaded images of hazed hood after UC. Tried to remove with UP. Marring would just **** up the UP white abrasives and embed. Used Blackwax to remove
Atalanta Feb 21st, 2019, 09:38 PM