Questions on durability of NXT?

[Mike Phillips]

Originally posted by RamAirV1
Three questions:

Does applying (and removing) wax with the PC and the correct pads and bonnets improve longevity compared to hand application and removal?

I would give the hedge to machine application because it will be a more even and thorough for application. Removal is probably the same but if there is a difference, I don't think it would noticable.

NXT Car Wash label calls for 1 oz. per gallon of water. If a higher concentration is used, like 1.3 oz. per gallon, would that affect the longevity of the wax?

That's a good question, I don't have the answer. But I'll check.

When will the new Ultimate Bonnets be available? The old ones work fine but I am anxious to try the new ones.

Probably as soon as the old ones are depleted from inventory.

Mike

[RamAirV1]

Thanks Mike. The original Ulitmate Bonnets work fine, but if the newer ones are even better I want some. I find that the Ultimate Bonnets cause less swirls than any other method of product removal. And the Ultimate Wipes are very good too.

RamAirV1

[Mike Phillips]

Originally posted by RamAirV1
Thanks Mike. The original Ulitmate Bonnets work fine, but if the newer ones are even better I want some. I find that the Ultimate Bonnets cause less swirls than any other method of product removal. And the Ultimate Wipes are very good too.

RamAirV1

PM me your shipping address and I'll send you a couple for review.

Mike