New to this forum and my first post
I have a white lexus and really want to have it detail and create the "wet look"
Here's the steps I gather from reading this forum and autopia. Please tell me if i'm on the right track. I also have few questions along the process.
Tools: PC7424 with LC pads.
1. Wash - NXT or Gold Class wash
2. Clay - (Can I leave the surface wet while clay it with QD?)
3. Wash again.
4. Swirl Mark removal (same as spiderweb effect?) - Any difference between #80 and #83? I'm going to use fine cutting pad to accomplish this step and set the speed at 5 on PC. Work on one section for about 2-3 min. Should I use MF towel to wipe the residual off?
5. Polish - Use #7 to polish it. Will use polish pad with speed of 5 to polish one section. Polish it up down lef right direction until the polish oil is gone.
Do I use QD to wipe the residual off? How much waiting time between each polish?
6. Wax - Use #26 to wax it. Again, will use finish pad at speed of 5 to put the wax on.
Should I just wipe the dry wax off with MF towel? Waiting time between each layer? 12 hours? If use NXT, will the cure time faster?
That's it....Did I miss anything?
I have a white lexus and really want to have it detail and create the "wet look"
Here's the steps I gather from reading this forum and autopia. Please tell me if i'm on the right track. I also have few questions along the process.
Tools: PC7424 with LC pads.
1. Wash - NXT or Gold Class wash
2. Clay - (Can I leave the surface wet while clay it with QD?)
3. Wash again.
4. Swirl Mark removal (same as spiderweb effect?) - Any difference between #80 and #83? I'm going to use fine cutting pad to accomplish this step and set the speed at 5 on PC. Work on one section for about 2-3 min. Should I use MF towel to wipe the residual off?
5. Polish - Use #7 to polish it. Will use polish pad with speed of 5 to polish one section. Polish it up down lef right direction until the polish oil is gone.
Do I use QD to wipe the residual off? How much waiting time between each polish?
6. Wax - Use #26 to wax it. Again, will use finish pad at speed of 5 to put the wax on.
Should I just wipe the dry wax off with MF towel? Waiting time between each layer? 12 hours? If use NXT, will the cure time faster?
That's it....Did I miss anything?
Comment